In the 90 prizm I have the starte kinda looks like a big black rectangularish box. It's located at the back of the engine under the air filter. It's held together by two screws, the top screw is accessible by removing the housing for the air filter. The bottom screw is on the bottom. There's also a wire that connects the starter to the battery.
Look here: How do you change the starter on a 1996 Toyota Corolla?Prizm and Corolla engines are the same.
You need a new starter
First you look and try to jump it if it rumbles its the allternater
The signal for the starter originates from the key switch, I would start there.
Geo Prizm was created in 1989.
My 1991 Geo Prizm LSI does not have overdrive My 1991 Geo Prizm LSI does not have overdrive
In a 1995 Geo Prizm, the starter is located on the engine, typically mounted near the bottom of the engine block. It's positioned on the passenger side, close to the transmission. To access it, you may need to lift the vehicle for better clearance and visibility.
Geo Prizm is compatible with the Toyota Corolla.
Go to http://autos.msn.com/ and put in geo/prizm... then look up the year of the prizm...1996... click on features and specs. Scroll down, and you'll find the horsepower of a 1.6 liter 1996 geo prizm. I found it to be 100 horsepower.
Make sure the starter is getting voltage. If it is, perhaps the starter is bad. If it isn't, maybe your ignition switch is shot.
How can find vin geo prizm cevrolet 1994?
I can't provide images, but I can describe where the starter is located on a 1991 Geo Prizm. The starter is typically found on the lower side of the engine, near the transmission, on the driver's side. It's a cylindrical component with electrical connections, usually mounted to the engine block. For the best results, you may want to consult a repair manual or online resources specific to the Geo Prizm for visual references.