The Chrysler Cirrus did not come out until 1995. You reset the check engine light with a scan tool or by unhooking the battery. If you have not repaired the cause of the code the light will come back on.
Does the check-engine light come on? If it does then the OBD computer will have recorded the reason why. Go here to get the error code: http://www.allpar.com/fix/codes/index.html I did this and found I had a faulty oxygen sensor. Good luck!
The computer detects a malfunction and sets a code.
Trouble code P1687 means: No Mechanical Instrument cluster bus message
That happens when the computer detects a malfunction and sets a code. You need to have the transmission computer checked with a scan tool to know possible causes.
You need a code reader to reset & plug into port.
Trouble code P0601 means:Internal control module memory check sum error
Code P1294 for a 1996 Chrysler Cirrus indicates a problem with the intake air temperature sensor or its circuit. To fix this issue, start by checking the wiring and connectors for any damage or corrosion. If the wiring is intact, test the intake air temperature sensor using a multimeter to ensure it is functioning correctly; replace it if necessary. Finally, clear the code and test drive the vehicle to see if the code returns.
Gear ratio error in first gear.
P0720 Output Speed Sensor Circuit Malfunction
It is the end code, meaning there are no more codes to flash or show. It is not an error code.
error code cpk