That is an internal transmission computer failure code. The tcm needs replaced.
That is an internal transmission computer failure code. The tcm needs replaced.
check to see if thers a speed sensor unit failure from the transmission.. Had this problem on a Caddy
A noise when moving the gear shift in your 1999 Chrysler Sebring could indicate several issues. It might be due to worn or damaged bushings in the shifter assembly, loose components, or a problem with the transmission linkages. Additionally, low transmission fluid levels or issues with the transmission itself could also contribute to unusual sounds. It's advisable to have a mechanic inspect the vehicle for an accurate diagnosis.
my 98 Chrysler Sebring cv is not fiereing need information own what maybe causeing this problem
Could be low on transmission fluid. If so you have a heck-of-an oil leak.
If the 2007 Chrysler Sebring 2.71 is not starting without stater fluid in the air filter is could indicate a faulty starter or the air filer may need replacing.
i just put a new computer in my 2002 sebring and now I am having a problem starting the car
I have the same problem I am ready to jack the chrysler up and install a Toyota underneath it
change MAP sensor
Yes.
Take it to a transmission shop. Depending on what you mean by front gasket, it will probably involve removing the transmission. Again depending on what you mean, it is most likely an indicator of a bigger problem.
If it is a 2007-2010 there is a spring retainer on the shifter that breaks.
That will depend on the problem. Could be $100-$1000.