Time to see your mechanic.
If the abs/traction light is on you have a problem with the system. When the problem is fixed the light will reset itself after a short drive.
There is a problem with the ABS system. It is part of Traction Control. If the ABS is not working then the Traction Control is not working. You still have standard braking but probably no ABS. Have this checked by a professional, as it can be many things.
The light is on because there is a problem detected by the ABS/Traction control module. Once the problem is fixed the light will reset itself after a short drive.
you have a problem with your abs system
There is a problem with a speed sensor. Go to a repair shop and have it diagnosed.jd
possibly could. first check the abs sensors if bad they could think the wheel is skidding and therefore lose its traction, check wires to abs sensor.
Probably wheel speed sensor failure (in the wheel bearing assembly).
means your abs (brakes) NEEDS REPAIR OR SERVICE
These lights are probably all related. When there is a problem in the ABS system, this will disable the TRACTION system, which will inturn illumiinate the Service Vehicle Soon light. A common cause for this is there is a problem in the ABS. A faulty wheel speed senor or the harness to the sensor may be faulty. When the ABS computer (EBCM) sees a problem in the ABS, it can cause all these lights to come on. A scan of the ABS computer would be the first thing needed. Then, diagnosis of the system / circuit that is at fault would be needed. Tech JK -----------------------------------------------
service light and abs light on my clio 172 sport how do i reset thanks
Problem with the ABS. The Traction Control is off because it uses the ABS to control traction. As this is part of the TC system it has also shut down. Have the problem with the ABS repaired by a professional and both will start working again.
re: bad regulator in the alternator WRONG ANSWER. these lights, when on at the same time, mean one that you will need to change one of your wheel bearings. You will need to have the vehicle scanned to determine which of the four is in need of replacement.