The "bus" is the communication network on the vehicle. "no bus" is a failure message that the system is down. The problem can be any computer, or any wiring in between.
It means that there is a failure in the communication system between the computers on your truck, you will need to have it diagnosed with a scan tool.
The "BUS" is the system Chrysler uses for it's computers to communicate on this truck. The error in the odometer means that the cluster is not receiving any messages. Any of the computers on the truck can bring down the BUS. ie pcm, abs, airbag, ctm, cluster, overhead mssg center, etc... The wiring in between can also be the cause.
The "BUS" is the system Chrysler uses for it's computers to communicate on this truck. The error in the odometer means that the cluster is not receiving any messages.The "BUS" is the system Chrysler uses for it's computers to communicate on this truck. The error in the odometer means that the cluster is not receiving any messages.
No a bus is not a truck.
what do no bus mean
It is a failure of the communication system on the truck (called a bus). The cause can include computers, wires, fuses, grounds, etc.
the insrument cluster is not receiving any messages from the other computers in the car. the "bus" is the communication network built into the car
No bus means there is no signal from the PCM,most likely a bad PCM,but check all your fuses and connections on PCM
Since momentum equals mass times velocity, if the mass of the truck times its velocity is greater than the mass of the bus times the bus' velocity then the momentum of the truck will be greater than the momentum of the bus.
The "bus" is the system the computer on the Ram use to "talk" to each other. The "no bus" message on the odometer means that the system has failed. You will need access to a scan tool to diagnose. Any computer on the truck or any of the wires in between can cause this problem.
The "bus" is the communication system for the computers on the vehicle. "no bus" means that communication is not happening. It could be a computer, wiring, fuse, ground, etc issue.
the insrument cluster is not receiving any messages from the other computers in the car. the "bus" is the communication network built into the car.