It is to advise the driver that the van requires a service.
this means that your van is due a service.
Spanner dose mean dash board help on laska.
Turn the key to position 2 then hold down the brake and accelerator pedal for 15 seconds, it will then flash remove key job done!
It means it's time for a service.
that means its due for a service
it means the car is due for a service
Oil Can = Fill up oil, low oilSpanner = Service needed
The spanner symbol on the dashboard of a Peugeot 307 indicates that the vehicle is due for a service or maintenance check. It serves as a reminder for the driver to schedule an appointment for routine maintenance, such as an oil change or inspection. If the light remains on after servicing, it may require resetting to turn off the warning indicator.
It means that your car think it needs to be serviced.
To reset the spanner symbol on the dashboard of a Peugeot 206 1.4 HDi, turn the ignition on without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off while continuing to hold the button. After a few seconds, turn the ignition back on, and the spanner light should reset. Release the button, and the warning light should now be gone.
It is the passenger eject button.
On my Renaut van it means it is ready for a service. It will come on after a year or a set mileage. As i don't own a transit i can not be 100% sure but I would imagine they would all be the same.