0
What else can I help you with?
Will your check engine light come on if you need an oil change in a 2000 dodge grand caravan?
no the check engine light won't come on for that vehicle engine light are mainly for emissions related items...if you have a overhead centre console that shows the direction and gas lilage and all that stuff it will show up as perform service soon
How do you reset the miles service oil on a 2004 Jeep Grand Cherokee?
Press the step button on the overhead console until the miles to service shows. The hold down reset until it resetsPress the step button on the overhead console until the miles to service shows. The hold down reset until it resets
What does the 'perform service' warning mean for a Dodge Grand Caravan?
CHAn9E code
How do you turn off the 'perform service' warning in 2001 Jeep Grand Cherokee?
if you have an overhead console, just change the mileage intreval due. Press the step button until 0 miles to service is displayed. Press and hold reset until the mileage resets.
2003 dodge ram overhead console removal?
I googled "04 Dodge Ram Manual" and downloaded the service manual from one of the links, which is different than the owners manual. The service manual is 2000+ pages long....here's what is says about the overhead console removal procedure....REMOVAL OVERHEAD CONSOLE REMOVAL (1) Disconnect and isolate the negative battery cable. (2) Remove the overhead console retaining screws, located in the sunglass storage bin. (3) Using your fingertips, grasp the sides of the overhead console and pull straight down evenly to disengage the two snap clips at the front of the unit. (4) Lower the overhead console far enough to access the wire harness connectors. (5) Disconnect the EVIC, CMTC electronic module and the reading/courtesy lamps electrical connectors. (6) Remove the overhead console from the vehicle. INSTALLATION (1) Position the overhead console in the vehicle. (2) Connect the EVIC, CMTC electronic module and the reading/courtesy lamps electrical connectors. (3) Grasp the sides of the overhead console and push straight up evenly to engage the two snap clips at the rear of the unit. (4) Install the overhead console retaining screw, located in the front of console. Torque the screw to 1.2 N·m (10 in. lbs.). (5) Connect the negative battery cable. I googled "04 Dodge Ram Manual" and downloaded the service manual from one of the links, which is different than the owners manual. The service manual is 2000+ pages long....here's what is says about the overhead console removal procedure....REMOVAL OVERHEAD CONSOLE REMOVAL (1) Disconnect and isolate the negative battery cable. (2) Remove the overhead console retaining screws, located in the sunglass storage bin. (3) Using your fingertips, grasp the sides of the overhead console and pull straight down evenly to disengage the two snap clips at the front of the unit. (4) Lower the overhead console far enough to access the wire harness connectors. (5) Disconnect the EVIC, CMTC electronic module and the reading/courtesy lamps electrical connectors. (6) Remove the overhead console from the vehicle. INSTALLATION (1) Position the overhead console in the vehicle. (2) Connect the EVIC, CMTC electronic module and the reading/courtesy lamps electrical connectors. (3) Grasp the sides of the overhead console and push straight up evenly to engage the two snap clips at the rear of the unit. (4) Install the overhead console retaining screw, located in the front of console. Torque the screw to 1.2 N·m (10 in. lbs.). (5) Connect the negative battery cable.
How do you remove overhead console 2007 Kia Sedona?
To remove the overhead console in a 2007 Kia Sedona, start by carefully prying off the plastic covers that conceal the screws using a flathead screwdriver or a trim removal tool. Remove the screws securing the console in place, then gently pull the console down. Disconnect any wiring harnesses connected to the console, and it should be free for removal. Always refer to the vehicle's service manual for specific instructions and safety precautions.
How do you reset a Jeep Cherokee Laredo after service?
Move through the overhead display to where it says perform service. Hold down the Reset button for a few seconds and it will reset to "3,000 miles to service"
How do you reset after an oil change on a 2003 Jeep Grand Cherokee?
Press the step button on the overhead console until the miles to service shows. The hold down reset until it resets.
How do you reset the perform service light on your 1999 Jeep Grand Cherokee?
Turn key on until you get dash lights (Don't Start)Now on overhead console computerPress STEP a few times until you see the section that shows zero miles to service and then press and hold RESET On a 1997 Jeep Grand Cherokee Laredo if the "Perform Service" light is in the middle of the dashSimply press the "SET" button until the display shows the "0 miles to service",Then hold the other button below it down until it resets to "3000".Works on various years of Jeeps also ..Pete
What does perform service light mean in a 2004 Jeep Grand Cherokee Laredo?
the perform service light on the overhead console is reminding you to change your oil.the system is based on miles driven and not on oil condition.look in owners manual the service interval can be changed and reset easily.usually if you go to independent shops for service the don't reset the reminder
How-to service my caravan?
What type of service does it need? The question is too vague for an answer.
How do you reset the overhead perform service light on a 2000 Jeep grand Cherokee?
Key on and shut the doors. Press "step" until "0 miles to service" is displayed. Now press and hold "reset" until the mileage resets.
