The ABS light on a 1994 Cutlass Supreme indicates a problem with the Anti-lock Braking System (ABS). This could be due to a malfunctioning sensor, a problem with the ABS control module, or issues with the hydraulic components. It's important to diagnose and address the issue promptly, as the ABS system helps prevent wheel lockup during braking, enhancing safety. A scan tool can be used to read any fault codes to pinpoint the exact problem.
Bring to ashop that has an ABS scanner to determine the problem
mine is under the hood in the fuse box on the drivers side
is it the abs or e brake light? More than likely it is an abs sensor. cost about 50 bucks to have replaced on my car hope this helps. If it is the red brake light, there is low fluid or the e-brake pedal is sagging. Check the reservior and top it. If it is the orange brake light, you'll need to have the ABS system tested to determine the cause. Or you could blindly buy and install parts as a guess.
Assuming you mean ABS light, the ABS (Anti-lock Brake System) light is on because the ABS module detects a problem with the ABS system. The light will remain on until the problem is fixed. As long as the ABS light is illuminated the ABS system will not function.
The ABS light is on because the ABS module detects a problem with the ABS system. Until the problem is fixed the ABS function will not operate and the light will remain on.
Most likely because of a problem with the ABS system, which could be expensive to fix. It could also be caused by low brake fluid.
ABS (Anti-Lock Brake System). If the light is on then you have a problem with that system.
ABS means Anti-lock Braking System. If the light is on and stays on, your ABS system has malfunctioned somehow and is not operating.
Possibly, try it for 5 minutes. Won't do any good unless you repair the problem. It will just come back on.
usually a bad wheel sensor.
The ABS light coming on means that the abs is not working. When braking hard the car could lock up the tires and slide.
no it has dic brakes