The Manifold absolute pressure monitors intake manifold pressure and ambient
barometric pressure. The PCM/ power train control module uses this input signal
to determine engine load and adjusts fuel injection duration accordingly.
Where is the map sensor on a 1997 Chevy 1500?
NO. They are 2 different designs. Will not interchange.
location of knock sensor in 1997 cheverolet Tahoe SUV 305 or 350 engine
Is this bank 2 sensor 1 or sensor 2?
Detach the 2 clips on each side of it and then remove it.
It is in the distributor under the rotor button and it is the only electrical device that you will see in there.
You need to clear the codes with a engine scanner.
It is screwed into the passenger side of the engine block just in front of the starter.
It is screewed into the passenger side of the engine block, Just in front of the starter.
If you remove the distributor cap and rotor then you will see the cam sensor bolted on the distributor and it will have an electrical connector pluged into it.
The Mass Air Flow sensor is located on the intake of Mercedes 420e.
It is on the front of the throttle body.