Headlights, interior lights, parking lights,
Headlights, interior lights, parking lights,
Headlights, interior lights, parking lights,
gfl
It is built into the headlight switch.
9004
Remove the headlight switch and check it for a melted plug.
I'm not sure, your asking the wrong person. sorry
To replace the turn signal switch of a 1996 Dodge Caravan, open the engine's hood to access the front turn signal bulbs. Then take the headlight assembly a little off the front to give room to get the bulbs. Remove the old turn signal switch and slip the new one in place.
Bulbs? Fuses? Relay? Dimmer switch? Headlight switch?
Headlight Switch REMOVAL & INSTALLATION1996 DakotaDisconnect the negative battery cable.Remove the steering column cover and remove the instrument panel bezel. Two screws are hidden behind the steering column cover.Remove the screws from the headlight switch bezel, pull the assembly out and disconnect the wiring.Remove the nut retaining the bezel to the bracket. Depress the spring button on the right side of the switch and remove the headlight switch knob and stem.Remove the spanner nut and remove the switch.The installation is the reverse of the removal procedure.
I would start with replacing the head light switch
No, a 1996 Ram does not have an inertia switch.
Dodge does not use inertia/reset switches.
The 1996 Jeep Cherokee headlight relay switch can be found on the firewall in the engine compartment. The headlight relay switch will be on the drivers side of the firewall.