0
Answer
A bad thermostat won't give you any heat and or it will give you too much heat. You would be wise to change it. Usually there are two bolts that hold a thermostat in place. You need to remove these two bolts, take the old thermostat out and see how high the temperature setting on it is. Some cars have a temperature of 165 F while other cars go as high as 195 F. To be sure you are getting the right thermostat for your car you can always go to an Auto Parts store, give them the make and model for your car along with the year and they should be able to give you the right one for your car.
Good luck.
AnswerA thermostat can fail in one of several ways. It can stick open, which means that, in cold weather, the engine will not warm up properly, or the thermostat can stick closed, which will result in the engine overheating, or the device can stick somewhere between the two extremes, which usually will result in the vehicle running cold.The easiest way to check the thermostat is to remove the radiator cap with the engine cold, start the engine, and let it warm up. When the coolant reaches the preset temp of the thermostat, the thermostat should open, which will allow hot water to enter the radiator.
What else can I help you with?
What is the purpose of a thermostat cable in a heating and cooling system?
The purpose of a thermostat cable in a heating and cooling system is to connect the thermostat to the heating and cooling equipment, allowing the thermostat to communicate with the system and control the temperature in the building.
What is the purpose of a thermostat in a heating system?
The purpose of a thermostat in a heating system is to regulate and maintain the desired temperature by turning the heating system on or off as needed.
What is the purpose of the thermostat R wire in a heating and cooling system?
The purpose of the thermostat R wire in a heating and cooling system is to provide power to the thermostat, allowing it to control the heating and cooling equipment in the system.
What is the purpose of an orange thermostat wire in a heating and cooling system?
The purpose of an orange thermostat wire in a heating and cooling system is to connect the thermostat to the heating and cooling equipment, allowing the thermostat to control the temperature settings and activate the system as needed.
What is the purpose of the brown thermostat wire in a heating and cooling system?
The purpose of the brown thermostat wire in a heating and cooling system is to connect the thermostat to the heating and cooling equipment, allowing the thermostat to control the temperature settings and activate the system as needed.
What is the purpose of the brown wire in a thermostat?
The purpose of the brown wire in a thermostat is to connect the thermostat to the heating system, typically used for controlling the heating function of the system.
What affect will a bad thermostat have on an automobile heating system?
A stuck open thermostat will not allow the coolant to get up to proper temp, thus poor heat from heater. A stuck closed thermostat will not let coolant circulate and will cause the engine to overheat.
What is the function of a thermostat transformer in a heating and cooling system?
The function of a thermostat transformer in a heating and cooling system is to convert the standard voltage from the electrical system into a lower voltage that can be safely used by the thermostat to control the heating and cooling equipment.
What is the purpose of the thermostat power wire in a heating and cooling system?
The purpose of the thermostat power wire in a heating and cooling system is to provide electrical power to the thermostat, allowing it to control the temperature settings and activate the heating or cooling system as needed.
What is the purpose of the RH wire in a thermostat?
The purpose of the RH wire in a thermostat is to connect to the heating system in order to control the heating function of the HVAC system.
What are the key considerations when selecting a 120v thermostat for a residential heating system?
When selecting a 120v thermostat for a residential heating system, key considerations include compatibility with the heating system, ease of installation and use, programmable features for energy efficiency, and reliability of the thermostat brand.
What is the purpose of the thermostat C wire and how does it function in a heating and cooling system?
The purpose of the thermostat C wire is to provide a continuous source of power to the thermostat. In a heating and cooling system, the C wire completes the circuit and allows the thermostat to communicate with the HVAC system, enabling it to control the heating and cooling functions effectively.
