The license plate lights are not in a separate fuce by it seft. They are the same as your side marker lights. So, check if your side marker lights are working and if they are them is a bad license plate light bulb.
Check bulbs
To change the license plate on a 2003 Corvette, locate the two screws or bolts holding the license plate bracket in place, usually found at the top or bottom of the plate. Use a screwdriver or wrench to remove these fasteners and take off the old plate. Align the new license plate with the bracket, secure it in place using the screws or bolts, and make sure it's tightened properly. Finally, check that the plate is level and properly positioned.
Because this bulb is mounted vertically, it can be tricky. The recommended method is to remove the license plate and open the trunk lid.
drivers side
next to the battery box
you can find the horns in the grille.both opposite side of the license plate.
If my memory serves me correctly, it opened -- as a tent -- in 2003.
Discription of fuse box in 2001 Porsche boxter
The fuse for the license plate light on a 2003 Acura RSX is located in the interior fuse box, which is typically found under the dashboard on the driver's side. To access it, remove the cover of the fuse box and look for the specific fuse designated for the license plate lights, usually labeled in the diagram on the cover. If the fuse is blown, it can be replaced with a new one of the same amperage.
To install a front license plate bracket on a 2003 Audi TT, first locate the pre-drilled holes on the front bumper for the bracket. Align the bracket with these holes and use the provided screws or bolts to secure it in place. Ensure it's mounted straight and tight to avoid any wobbling. Finally, attach your license plate to the bracket using the appropriate fasteners.
break the glass take out the bulb and put the other one in