0
This could mean that either the battery is installed incorrectly or it is the wrong size battery.
Check to make sure that the correct terminals are on the same ends of the m\battery as the original. Different cars have terminals on different sides depending on which side of the car the battery is located. There are also different size batteries having one that is too tall or too wide can make fit a problem.
When purchasing a battery (typical set up at any of the Mart stores) There is a catalog of sorts wghere you can look up your car make, model, year, and engine type / size. this will give you the part number of the correctly configured battery.
Another reason is maybe you put it in the car backwards (hey even the best of us can make a mistake).
If none of the above is a possibility then maybe the cable is under the battery check your installation methods to ensure that nothing is being trapped or pinched.
What else can I help you with?
How do you jumpstart battery on a bentley arnage?
To jumpstart a Bentley Arnage, first ensure both vehicles are off and parked close enough for the jumper cables to reach. Connect the red cable to the positive terminal of the dead battery and the other end to the positive terminal of the working battery. Then, connect the black cable to the negative terminal of the working battery and attach the other end to a grounded metal surface on the Bentley, away from the battery. Start the working vehicle, let it run for a few minutes, and then attempt to start the Arnage.
How do you jump start a 1999 Volvo s80?
To jump start a 1999 Volvo S80, first, position a working vehicle close enough for the jumper cables to reach both batteries without the cars touching. Connect the red (positive) cable to the dead battery's positive terminal, then to the working battery's positive terminal. Next, attach the black (negative) cable to the working battery's negative terminal, and connect the other end to an unpainted metal surface on the dead car to ground it. Start the working vehicle, let it run for a few minutes, then attempt to start the Volvo.
Which way round does a battery go into an old mini?
The RED Cable goes to the + post on the battery. The BLACK Cable goes to the - post on the battery. Turn you battery which ever direction it takes to make the cables reach the correct posts.
Where is the positive charge located on a Yamaha virago 1100 battery?
The battery is inside abattery box hold by rubber band, the battery box has to be slide out to reach the positive terminal.
What is the best way to reach Lantau Island Cable Car from the city center?
The best way to reach Lantau Island Cable Car from the city center is by taking the MTR to Tung Chung Station and then walking to the Ngong Ping 360 Cable Car terminal.
Does rain reach terminal velocity?
No, raindrops do not reach terminal velocity because they are too small and have a low enough mass that air resistance slows them down before they can reach their maximum falling speed. Terminal velocity is typically reached by larger objects like skydivers or hailstones.
How do you charge a 2002 BMW 745i battery?
Things You'll NeedCar battery chargero 1 Check that the electrical items in your BMW 328i are turned off and the key is not in the ignition. Open the hood and secure it.o 2 Place your battery charger near the BMW 328i's battery. You need the charger cables to easily reach the car's battery.o 3 Attach the spring clamp on the end of the red cable attached to the battery charger onto the positive terminal of the BMW 328i's battery. The positive terminal is labeled "+" or "Pos."o 4 Attach the spring clamp on the end of the black cable attached to the battery charger onto the negative terminal of the BMW 328i's battery. The negative terminal is labeled "-" or "Neg."o 5 Select the charge setting on your battery charger. If you need to boost your BMW 328i's battery quickly, select the highest charge rate. If you want to charge it slowly -- overnight, for example -- select the lowest charge setting. This setting is often labeled "trickle charge."o 6 Turn on the battery charger. Make sure it is charging at the rate you want. Leave it for several hours, or overnight if on a trickle charge.o 7 Turn off the charger. Remove the black negative cable attached to the charger off the battery's negative terminal. Remove the red positive cable off the battery's positive terminal.o 8 Move the charger away from the BMW 328i. Close the hood.
Does a acorn that falls from a tree reach its terminal velocity?
No, an acorn is too small and light to reach its terminal velocity when falling from a tree. Terminal velocity is the maximum constant speed that an object reaches when the drag force equals the force of gravity, and the small size and weight of an acorn mean that it doesn't experience enough air resistance to reach this terminal velocity.
Can you take of your front brake cable and turn it into a straight back cable on a bmx bike?
It's usually not long enough to reach, so no.
Where is the starter solenoid on a 02 mustang gt?
The starter solenoid is close to the battery of your car. Follow the red battery cable to reach the solenoid. Use your car's manual for any help.
How do you bypass firewall solenoid to starter mounted solenoid upgraded 86 T-5 with 95 T-5 and had to change starter which has mounted solenoid to fit bell housing Ford Mustang?
Connect the positive battery terminal directly to the starter. You'll need a new, longer cable to reach it.
Were is a good place to ground a car battery?
Grounding a Vehicle BatteryUsually, manufacturers attach the ground cable from the battery to the engine block. I don't change that unless some other factor makes using the manufacturer's ground location impossible, and then I route the ground cable to a manifold bolt within reach of the cable.
