5x4.75 or 5x4 3/4 standard GM.
Big job!! get a manual on your car.
On a 1968 Buick Skylark convertible, the fuse box is typically located under the dashboard on the driver's side. It can be found mounted to the left of the steering column, close to the firewall. You may need to remove a cover or panel to access it. If you have trouble locating it, referring to the owner's manual can provide more specific guidance.
Ah, the fuse panel on a 1968 Buick Skylark is usually located under the dashboard on the driver's side. It's like a little treasure chest where you can find the fuses to keep your car running smoothly. Just take your time and explore gently, and you'll find it in no time.
To open the hood latch on a 1968 Buick Skylark, first, locate the interior hood release lever, which is typically found on the driver’s side, near the bottom of the dashboard. Pull the lever to release the primary latch. Then, go to the front of the car, slide your hand under the center of the hood, and locate the secondary latch, which you need to push or lift to fully release the hood. Once released, you can lift the hood up and secure it with the prop rod if necessary.
Judd for the Defense - 1967 Fall of a Skylark The Trial - Part 1 1-17 was released on: USA: 5 January 1968
Judd for the Defense - 1967 Fall of a Skylark The Appeal - Part 2 1-18 was released on: USA: 12 January 1968
The frame from ANY GM A-body of the same body type (2-door, 4-door, etc) will bolt right in because they all use the same frames. So a frame from a Chevelle, Tempest/Lemans/GTO, Buick Skylark, or Cutlass will fit. Any frame from 1964-1967 will work. 1968 and later frames won't work because the wheelbase changed in 1968.
nobody really knows
The same as you do in the 1968 Buick Wildcat
factory rated at 390 hp gross
What is the bolt pattern on a 1968 Pontiac Catalina
YES,All 1968-1972 gm a-body ( cutlass,chevelle,skylark,gto) can be interchanged.