0
What else can I help you with?
What tool do you need to remove a 2001 dodge Dakota brake caliper?
a brake caliper tool (really)
Tool to remove Chevy Trailblazer caliper?
you can get the tool that removes the rear calipers from any autozone or advance auto parts. they rent it to you and you leave a deposit. the tool is designed to turn the caliper as it is being pushed in. if this tool is not used the caliper will fail.
How do you compress the rear calipers on a 1999 infiniti g20?
You need a caliper tool and a ratchet. Caliper tool is a cube with prongs on it, a couple dollars at a parts store or online. Just turn the caliper tool and on the caliper and it will compress.
What is a caliper reset tool?
A Caliper Reset Tool is a tool used to 'reset' the brake caliper piston on calipers with an integral handbrake system. The tool spins the piston while applying pressure to compress it enough to replace the old pads with newer thicker ones.
What tool do I need to push back the piston on the caliper of a 2002 Mitsubishi lancer?
You will need special brake caliper tool such as a C-clamp to push back the piston on the caliper of a 2002 Mitsubishi Lancer.
How do you replace the rear brake pads on a 1998 Lincoln Continental?
you will have to get a brake caliper tool. the rear caliper the center part turn or screws in with this tool
Do you ned a special tool to force the piston back into the caliper on a 2002 Subaru Forester?
Yes. Brake caliper compression tool. Ratcheting calipers
What is a tool measuring length?
Ruler. Micrometers. Caliper.
What the measuring tool for diameter of a dime?
A vernier caliper
How do you change brake pads and rotors on a 2003 Nissan Altima?
you need a caliper piston tool from autozone..and pads first and then you take caliper off of car and use tool to suppress the caliper piston.by using the old brake pad.the tool cost about.6 or 7$ that should do it for you
Resetting a rear brake caliper in 2006 Chevy uplander?
the caliper needs a special tool. the piston does not push straight in. the spring needs to be released at the rear of the caliper. then using the special tool the piston twists back in to place
How to Compress brake caliper on Volkswagen Jetta?
you need a special caliper tool that turns the piston as it pushes it in, or if you are on a tight budget grab a wrench and a regular caliper compressor and turn the caliper clockwise as you tighten the tool (or ask someone for help, easier with 2 people) hope this helps.
