bad axle joint or ball joints and turn stops can make popping
you might want to check your left side wheel bearings
Inspect the steering components, suspension, and brakes.
You probably need new tie rods on that side. have someone turn the wheel and check to see if you have in play any where.
Front cv joints most likely
The popping noise you hear when opening a can of Sprite is caused by the release of carbon dioxide gas that is dissolved in the soda. When you open the can, the pressure inside decreases rapidly, causing the gas to escape quickly and create the popping sound.
Possible causes of popping/grinding noises when turning:Wheel bearingsCV joint / axleBrakesSee "Related Questions" below for more
I heard it was an intermediate steering shaft and cost around 130.00 dollars
could be a contant velocity joint
Loss of power, smoke, knocking noise, popping noise, backfiring through carb, or out tailpipe. Any, or, all of these.
The popping noise in walls and ceilings could be caused by temperature changes, settling of the building, or the expansion and contraction of building materials. It could also be due to plumbing or electrical issues.
Could be a wheel bearing
If it pops when turning it is most likely the CV joints.