0
What else can I help you with?
What you have to change on the fuel tank as well as the lines to make a carburetor motor work in a 1993 Chevy camaro?
you would need a fuel pressure regulator to control the flow to the carb to keep the pressure about 5 or 6 PSI, you shouldn'rt have to do anything with the pump in the tank.
How do you release the fuel pressure on a 1990 Chevy Camaro?
Remove the gas cap. Look for a schrader valve on the fuel rail to release the pressure. If there is none then wrap the fuel filter connection and be prepared for a spray of fuel.
How do you release the pressure in the gas line of a 1994 Chevy Camaro?
Pull the fuel pump fuse and run the engine until it dies from fuel starvation.
Can I install an inline fuel pump in my 1993 Chevy Camaro?
yes but you need to cut the wires to the stock one in the tank or cap them
Where is the Fuel Pressure Regulator located on a 1993 Chevy Silverado C1500?
In the throttle body.
Location fuel pump relay 1983 Chevy Camaro?
The fuel pump relay of a 1983 Chevy Camaro can be found inside the relay fuse block. It provides power to the fuel pump.
Why does my 91 Chevy Camaro start when sprayed with starter fluid but not on its own?
Bad fuel pump or fuel pump relay. Maybe a bad fuel pressure regulator. You need to determine if the fuel pump is working.
Where is fuel emergency switch on 96 Chevy Camaro?
There is not one.
Does a 1991 Chevy Camaro have a fuel shut off switch?
No
Is there an access panel to the fuel pump on a 1989 Chevy Camaro?
No
How much fuel pressure does a 1993 Chevy Cavalier?
A 1993 Chevy Cavalier typically requires a fuel pressure of around 35-45 psi (pounds per square inch) for proper operation. This pressure is necessary for the fuel injection system to function correctly and ensure optimal engine performance. If you're experiencing issues, it's advisable to check the fuel pressure with a gauge to confirm it's within this range.
How do you replace the fuel pump on a 1987 Chevy Camaro?
You must remove the fuel tank.
