0
there are two tie rods on these vans. the inner and outer tie rods. if it is the inner itt is the long shaft type thing that goes right into the steering axle. the outer is where the grease fittings are and it attatches to the knuckle annd the inner tie rod. things that are necessary to do this are new parts, and there is a special tool that you need. they are available and most hardware stores such as Canadian tire to rent. after that you will need an alignment because it will be slightly off balance. when you unscrew the outer tie-rod from the inner tie-rod, count how many rotations you make so that when you but the new ones together it will be as close as possible so that you might not need an alignment.
What else can I help you with?
How can you open your hood on your 95 Pontiac transport if the cable is broken?
Reach under the front of your car between the radiator and the grill and pull the wire down. That will unhook your hood latch. Replace the cable.
How do you replace the serpentine belt pulley on a 1997 Pontiac Montana?
it is a 2001 Pontiac Montana that has broken three bealts so far I need to know what pully I will need to replace?
How do you fix an odometer cable in a 1994 Pontiac sunbird?
If it is broken they cannot be repaired. You need to replace it.
How do you fix the driver door handle on a 1990 Pontiac transport?
To fix the driver door handle on a 1990 Pontiac Transport, start by removing the door panel to access the handle mechanism. Unscrew and detach the broken handle, then replace it with a new or functional used handle. Reassemble the handle and door panel, ensuring all components are securely attached. Finally, test the handle to confirm proper operation.
How do you fix adjustment bar on drivers side seat 1995 Pontiac Transport?
To fix the adjustment bar on the driver's side seat of a 1995 Pontiac Transport, first, ensure the seat is in a position that allows access to the adjustment mechanism. Check for any visible obstructions or broken components around the bar; if necessary, remove the seat from the vehicle for better access. Tighten any loose bolts or screws and replace any damaged parts. Reinstall the seat, ensuring all connections are secure and test the adjustment to confirm it's functioning properly.
How do you fix a 1996 Pontiac grand prix door handle?
The door handle of a 1996 Pontiac Grand Prix can be replace because broken units will can not be fixed. To replace a handle remove the unit from the door and unhinged the locking mechanism.
How do you fix a broken seat back lever on a 2003 Pontiac Montana?
Replace the lever with a new or good used one.
Should you replace all guitar strings when one breaks?
It is not necessary to replace all guitar strings when one breaks. You can just replace the broken string.
Is it necessary to have root canals done on healthy teeth in order to replace a broken bridge?
http://www.intelligentdental.com/2009/12/20/broken-teeth/
How do you remove broken off drain plug from radiator of 1998 Pontiac transport?
Use an Easy out bit, (you'll find at your hardware store). Got mine stuck just yesterday
What part do i need to fix a broken fuel gauge for a 2001 Pontiac Montana?
you will need to replace the fuel sensor and it is all in one with the fuel pump its in the gas tank.
What is the technical name for the Automatic load leveling control system on a Pontiac transport Montana the control arm is broke and I need to replace it?
The technical name for the automatic load leveling control system on a Pontiac Transport Montana is the "Self-Leveling Suspension System." This system typically includes components like air shocks or electronic struts, which adjust to maintain a level ride height when the vehicle is loaded. If the control arm is broken, you may need to replace it along with any associated components to restore proper function. Always consult the vehicle's service manual for specific part numbers and installation instructions.
