0
What else can I help you with?
What size pipe is necessary for propane stove?
The size of the gas pipe needed for a propane stove typically depends on the distance from the propane tank to the stove and the BTU (British Thermal Units) rating of the stove. It is recommended to consult a licensed plumber or gas fitter to ensure the correct size pipe is used for the specific setup to ensure proper gas flow and safety.
What is nace pipe?
Pipe that meets the requirements of sour gas service per NACE MR0175.
What size gas pipe do you need to run 100' for 400000 BTU?
To run 400,000 BTU over a distance of 100 feet, you typically need a 2-inch gas pipe. This size accommodates the required gas flow while minimizing pressure drop. However, it's essential to check local codes and regulations, as they may have specific requirements or recommendations. Additionally, factors such as the type of gas and elevation can affect the final pipe size.
What information can be found on the black iron gas pipe sizing chart?
A black iron gas pipe sizing chart provides information on the recommended pipe size based on factors like gas flow rate, pressure, and distance. It helps determine the appropriate pipe size for safe and efficient gas distribution in a system.
What size pipe needed for 155000 BTU?
Need more info to give correct pipe size. Gas company, plumber/pipefitter, or HVAC contractor should be able to assist with sizing.
What does a yellow colored pipe mean?
Orange pipe is for natural gas.
How do you size gas pipe?
You will need a copy of the International Fuel Gas Code to start with. Turn to table 402.2 to get the BTU ratings for the appliances being installed, then turn to section 402.4 for the formulas to calculate your demand in cubic feet per hour, then turn to tables 402.4 (1-33) and choose the pipe material you want to use, the design pressure, and length of pipe to find the pipe size.
What martial use for gas pipe?
pipe
What size gas pipe do you need to run 600000 btus in a commercial building?
That would depend on the developed length and the local code and the specific graviety of the gas
When saying calculating inch dia of pipe is number of welded joints x pipe size that refers to lenght of pipe or diameter of pipe?
Pipe size refers to the diameter of the pipe (in inch).
What size copper bonding jumper is required by NEC - OR 2011 to bond the gas pipe to a 120v 20A circuit?
I don't know what the NEC - OR 2011 is. Is that a code book for the state of Oregon? The NEC does not allow using a gas pipe as a grounding electrode. You run the risk of heating the gas to explosive temperatures.
Can a gunite pool-spa have a heater added and if so what is involved with the installation?
You need to determine the: gas heater size for the specific pool/spa (with spa use no less than 400,000 BTU). ( how fast do you want the spa to heat to temp?) length of the gas run from the gas meter to the heater pad. size of the gas meter size of the gas pipe at a minimum. Ken
