It is a tool used to keep the front engine cover on the cylinder block when replacing the water pump on a V6 (maybe even a V8, but not 4 cylinders). The mounting bolts for the water pump also keep the front cover on the block. If you do not use this tool, you run the risk of allowing water to creep into block.
buy it from the slot
I believ that a special tool is required it might be cheaper to have it done than to buy the tool
You Need A Special Tool, Which You Can Buy At AutoZone Or Something. You Open The Tail Gate, Then You Use The Special Tool To Unscrew the Screws And The Taillight Comes out.
They require a special tool. Go to the dealer and buy new belts. They will come with the tool and instructions.
A Mopar special tool and a star scan is required to check the transmission fluid in any of the newer model dodge, chrysler, and jeeps. The dipstick is a special tool only available to the dealer. Anyone can buy the "Special tool". You'll need to find the dipstick for your particular vehicle or buy one from the dealer. It's referred to as a "Miller special tool". Mine was about $70, non-stock and took two days to arrive.
get a sharp pointed tool and tap the screw head along the edge in the unscrew direction be patient or you can buy a special tool at sears for that
You need a special pulley removal tool. And you will also need a special tool to reinstall the pulley. You might be able to buy one at your local parts store.
You need a special tool. It turns as it is pushed in. Some auto parts stores will lend you the tool if you buy the parts from them.
you need a special tap, puller and install tool. Buy them or get a dealer to do it.
It is a special tool that only the dealer has.It is a special tool that only the dealer has.
It takes a special tool that the dealer has.It takes a special tool that the dealer has.
It is a special tool that only the dealer has.It is a special tool that only the dealer has.