Read the tag on your furnace for the input/output rating. American Standard and all other manufacturers make more than one size furnace.
Divide the btu output rating by the btu input rating. Both of these values can be found on the furnace`s nametag.
It depends on the furnace, they come in different sizes. There should be a data plate on or in the furnace which lists the input and output rating.
100,000 btu input. The output depends on the efficienct rating of the furnace, ie 95%efficient = 95,000 btu output, 80% = 80,000 btu output.
The output rating of a 96% efficient boiler or furnace rated at 100,000 input.
The BTU output of a Keeprite furnace varies by model. Typically, Keeprite furnaces range from around 40,000 to over 100,000 BTUs, depending on the specific unit and its intended application. To determine the exact BTU rating of a specific Keeprite furnace model, it's best to consult the manufacturer's specifications or the unit's documentation.
you are referencing a 75,000 BTU furnace.
One liter of furnace oil contains approximately 36,000 BTUs (British Thermal Units). This measurement is a standard conversion for the energy content of furnace oil, which is commonly used for heating purposes. The BTU value may vary slightly depending on the specific composition and quality of the oil.
67,500 BTU electric furnace
The BTU output requirements of your furnace must be determined by heat load and heat loss calculations on the area that is heated. You should consult several HVAC contractors for estimates and recommendations.There are many factors that influence the BTU requirements of a furnace in any location.
Gas usage is measured in cubic feet because it is a vapor. Look at the tag on your furnace and find the input rating, natural gas contains roughly 1000 btu per cubic foot. So divide the input rating by 1000 and you have your answer.
Oil has the higher BTU rating Depends. If it is Liquified Nat. Gas then it has the higher rating.
Heptane has the chemical formula of C7H16. It has a BTU rating of 19,163 BTU per pound and a rating of 4,465.8 kilojoules per mole.