0
What else can I help you with?
Where is the obd connector on a 2002 Ford Escape?
The 2001 Ford Escape OBd 2 port is on lower edge of dash, right of hood release
Where is the OBD diagnostic plug located on a 2005 Ford Escape?
The 2005 Ford Escape OBD 2 port is on lower edge of dash, right of hood release
Where is the OBD diagnostic plug located on a 2008 Ford Escape?
The 2008 Ford Escape OBD 2 port is under driver side dash left of steering column
Where is the obd connector on a 2004ford escape?
The 2004 Ford Escape OBD 2 port is on lower edge of dash, right of hood release
Where is the OBD diagnostic plug located on a 2003 ford escape?
Under the dash near the steering wheel. Assuming yours is the same as the 2001, it is under the dash, to the LEFT of the steering column and near the hood release.
Where is the fuse for the OBD 2003 ford Windstar?
The fuse for the OBD (On-Board Diagnostics) system in a 2003 Ford Windstar is located in the fuse box under the dashboard on the driver's side. Specifically, it is usually labeled as "OBD" or "PCM" (Powertrain Control Module). You can check the owner's manual for the exact fuse location and specifications. If the fuse is blown, replacing it may restore functionality to the OBD system.
Where is the location of OBD II port on a 2002 Ford escape?
Under the dash, located just left of the steering column.
How many miles before obd codes reset on 2001 ford escape?
The light won't reset until the problem is fixed.
What is the protocol of the computer on a Ford Aerostar-91 Is it ODB or what?
All cars sold in the US were required by law to have:OBD 1 during the years from 1980-1996.OBD 2 was required from 1996-present.Some manufacturers phazed in OBD 2 early, starting around 1994, but a 1991 Aerostar is definitely OBD 1.However, the term "protocol" does not refer to the diagnostic requirements, like the term "OBD"(On-Board Diagnostics) does. In other words, OBD is not a protocol. OBD is an emmissions requirement mandated by the EPA. EPA law says you have to have On-Board Diagnostics(OBD) following certain requirements. They had one set of laws that were in effect prior to 1996, which was refferred to as OBD 1. OBD 2 came into effect from 1996 on, but some manufacturers were a litte ahead of the game, and started meeting OBD 2 requirements in 1994 or 1995.Protocol is a language or platform used by the programmers and engineers. In other words, two OBD systems, of the same year, side-by side, may use a different protocol depending on what their respective manufacturers used. A 1991 Ford and a 1991 Dodge, would not use the same protocol, yet would still meet OBD 1 requirements.The protocol that a 1991 Aerostar probably used was ISO 9141, but it's diagnostic system would be called OBD 1.AnswerA shop foreman at your local FORD dealer should be able to answer over the phone.. also...everyone should have a manual for their vehicle, and the local library should have a professional shop manual available, to make copies of, in the Reference section...good luck:)AnswerThe connector one OBD 1 is located under the hood on the passenger's side attached to the relay box.
Where is the location of OBD II port on a 2018 Ford escape?
The OBD II port on a 2018 Ford Escape is typically located beneath the dashboard on the driver's side. To find it, look just above the brake pedal, near the area where the steering column meets the dashboard. It may be covered by a small plastic cover, which can be easily removed.
01 Ford Escape with obd po430?
Trouble code P0430 means: Catalyst System Efficiency Bank 2 Below Threshold
Which fuse is for cigarette lighter 2003 Ford Expedition?
In a 2003 Ford Expedition ( fuse # 41 is a yellow color 20 amp mini fuse ) for the cigarette lighter and OBD II diagnostic connector
