The oil capacity of a 2007 Chrysler Pacifica is approximately 5 quarts (4.7 liters) when using a standard oil filter. If you are using a larger filter, the capacity may increase slightly. Always refer to the owner's manual for the most accurate specifications and recommendations for your specific vehicle.
5 and a half quarts
Yes.
6 quarts
What type of oil does chrysler pacifica take
For a 2007 Chrysler Pacifica, it is recommended to use 5W-20 motor oil. This viscosity provides optimal performance and protection for the engine, especially in varying temperatures. Always check the owner’s manual for specific oil specifications and any updates or recommendations from the manufacturer.
A 3.8 liter Chrysler Pacifica hold approximately 5 quarts of oil. A 4.0 liter Chrysler Pacifica hold 5.5 quarts of oil.
It is on the back side of the oil pan. Use a thirteen mm wrench to remove it.
To reset the oil change message in a 2007 Chrysler Pacifica, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times in quick succession. Then turn the ignition off and start the engine; the oil change message should no longer be displayed. If it persists, repeat the process.
The oil capacity of a 2005 Chrysler Pacifica varies depending on the engine type. For the 3.5L V6 engine, the capacity is approximately 5 quarts (with a filter change), while the 4.0L V6 engine has a capacity of about 6 quarts (also with a filter change). Always refer to the owner's manual for the most accurate information specific to your vehicle.
Bottom of the oil pan
Bottom of the oil pan.
10w3010w30