Should be about 12 base for a total of 28 - 32. see link for more info
trying to set base timing on a 97 Chevy c1500 with a 5.7 engine the wire to disconnect to set base timing is ?
Base timing is set to 0 deg with a scan tool. You can not do this with a timing light.
need to know about the procedure for base timing on ef ford thank you
The base word for prejudiced is judge.
Judge.
Assuming you are running a point type distributor a Pontiac typically likes 12-14 degrees initial advance. This is also a good starting point for HEI.
0 TDC base timing.
The 1998 Buick Park Avenue Base is equipped with a timing chain, not a timing belt. Timing chains are generally more durable and have a longer lifespan than timing belts, often lasting the lifetime of the engine with proper maintenance.
Its the brown wire from the distributor, goes to the fuses/relays on your firewall. unhook that and you will have your base timing.
depends on if your trying to set the time on the timing chain or trying to set the base timing for the computer. The base timing is fixed by the PCM/computer. for setting the time on the timing chain consult a service manual
Engine 4.3L (262 cid)Base Timing 0~ TDC (Manual Trans).Engine 4.3L (262 cid)Base Timing 0~ TDC (Auto Trans).
The ignition timing is computer controlled - not adjustable - but the base timing is 10 degrees BTDC