0
What else can I help you with?
How do you remove lifters from a 1969 302 V8 Mustang Coupe?
Best way for me is to use a magnetic pick up tool and go in from the top after you have removed the rocker arms and push rods
How do you replace ML320 Lifters?
To replace the lifters in a Mercedes ML320, first, disconnect the battery and remove the engine cover. Then, take off the intake manifold and valve covers to access the lifters. Carefully remove the old lifters using a magnet or pick tool, and install the new ones, ensuring they are properly seated. Reassemble the components in reverse order, making sure all bolts are torqued to the manufacturer's specifications.
What is the best tool to remove roots effectively and efficiently?
A sharp and sturdy axe is the best tool to remove roots effectively and efficiently.
What is the best tool to remove tile effectively and efficiently?
A power tile saw is the best tool to remove tile effectively and efficiently.
What is the best tool to remove tile floor efficiently and effectively?
A power tile scraper is the best tool to efficiently and effectively remove tile floor.
What is the best program to remove a virus?
Optimo AV is the best antivirus software tool to remove the virus.
What is the best way to remove a Shimano cassette lockring using a Shimano cassette lockring tool?
To remove a Shimano cassette lockring, use a Shimano cassette lockring tool. Insert the tool into the lockring and turn counterclockwise to loosen and remove it.
What is the best floor removal tool to efficiently and effectively remove flooring materials?
A power scraper is the best tool for efficiently and effectively removing flooring materials.
How do you change lifters in 1998 eclipse?
In order to change the lifters you must remove the Valve cover. I believe it is held down with 10mm bolts. After you remove the Valve Cover you till see the lifters. There are 16 of them. 8 close to you the 8 closer to the wind shield. I highly recommend you use a pair of clamps to hold your timing belt to the wheel because you can potentially knock your timing out of whack. After you have removed the valve cover gasket and have secured your timing belt you will need a small crowbar or some type of tool for leverage and a 10mm or 12mm socket to remove the braces over the rocker arms, rocker arms are what set on top of the lifters. There will be 2 bolts holding each brace on. Start from the left and work to the right ( if facing the engine ). After you remove the brace use your pry tool and pull the rocker arm off of the lifters. After you have the lifters will pull right up. Drop your new one in and replace the rocker arm and the brace. Go down the line doing so. Be careful as you get close to the timing belt wheel. For much more details and any information regarding the 1st & 2nd gen eclipse visit www.vfaq.com they have a complete how to on the lifters. Good luck
What is the best way to remove a bike crank using a bike crank tool?
To remove a bike crank using a bike crank tool, first, ensure the bike is stable and the chain is off. Then, insert the crank tool into the crank bolt and turn it counterclockwise to loosen and remove the crank. Make sure to follow the manufacturer's instructions for your specific bike crank tool for best results.
What is the best way to remove an aerator using an aerator removal tool?
To remove an aerator using an aerator removal tool, first, ensure the water supply is turned off. Then, place the removal tool over the aerator and turn it counterclockwise to loosen and remove the aerator.
What is the best drain pipe cleaning tool to effectively remove clogs and blockages?
A drain snake is the best tool for effectively removing clogs and blockages in drain pipes.
