The bolt pattern of all Caprice 1991-1996 is 5X127.0mm 12mmX1.5mm
More info at link
You will be looking at an engine overhaul which can cost $2,500 to $3,000.
Blow-by (Bad engine rings)
The 1991-1996 Caprice and Impala have a 5x5 bolt pattern. It is 5x127mm in metric terms.
5X5 large Chevy pattern
Look for a blockage in the exhaust, most likely the cat, or a pinched pipe.
All 91-96 GM B-body cars have a 5" wheel bolt pattern.
what type of antifreeze do i need to use on a 1995 chevrolet caprice
Yes
The TCC solenoid on a 1995 Caprice Classic is located in front of the transmission. It is bolted to the bottom of the pump.
yes it will as longgest as you atleast raise you caprice for atleast 2 inches. and make sure u get the right bolt pattern most caprices have 5.0 bolt pattern. or otherwise u will have to buy adapters which they are about $100..
on a 1995 caprice with 4.3 L 8cyl you have to remove a pulley and the water pump to get to the cap and rotor and it is very expensive.
in the tank