0
The heater core is located inside the passenger compartment behind the glove box. Remove the glove box liner by removing about 6 screws. Unscrew the heater core cover and you can then see the heater core. Inside the engine compartment you will be able to see where the two hoses connect to the heater core. Disconnect these and with a little wiggling, the heater core will come out. ------------------------------------------------------------- *** Caution ***Never open, service or drain the radiator or cooling system when hot; serious burns can occur from the steam and hot coolant. Also when draining engine coolant, keep in mind that cats and dogs are attracted to ethylene glycol antifreeze and could drink ant that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantities. Always drain coolant into a sealable container. Coolant should be reused unless it is contaminated or is several years old. Heater Core 1. Disconnect the battery ground cable 2. Drain and recycle the engine coolant. 3. Remove the instrumental panel. 4. If equipped with the 5.4L 4V engine, remove the junction block splash shield. 5. If equipped with the 5.4L 4V engine, remove the bolts and disconnect the cable ends from the starter relay. 6. If equipped with the 5.4L 4V engine, remove the junction block bracket. 7. Disconnect the heater core hose couplings. 8. Remove the retaining screw and remove the A/C plenum demister adapter. 9. Disconnect the vacuum line from the A/C plenum demister adapter. 10. Remove the heater core bracket. 11. Remove the 13 plenum chamber top retaining screws. 12. Remove the plenum chamber top. 13. Remove the blend door assembly from the case. 14. Remove the heater core. 15. The installation is the reverse of the removal.
What else can I help you with?
How do I replace the Block Heater 1998 F150 4.6L?
How do I replace the block heater in my 1998 F150 4.6L?
How do you replace a heater flap on a 1999 ford F150?
The heater flap, or blend door, is difficult to replace with OEM parts supplied from Ford. There is an aftermarket kit that makes the job and cost significantly easier at heatertreater.net or on the Ebay listing.
1986 f150 302 emissom light on?
1986 f150 emisson light on is their restn set
How do you replace the shifting synchronizers and the shifting forks in a 1986 ford f150 4 speed?
No easy task...you need a mechanic.
How do you remove the dash of a 1998 Ford F150 to replace the heater core?
you should be able to get at heater core just by removing glove box.no need to remove all the dash Is there any instructions on how to do this?
How do you change the heater core in a 87 Ford F-150?
To change the heater core in a 87 ford f150 is easy. Just remove the glove box and then behind it there is 7 bolts. After you remove the 7 bolts then just remove the cover and behind it is the heater core. By far the easiest heater core I ever changed.
How do you replace door glass on a 1986 F150 truck?
try going to a shop or go to home depot and ask a person.! good luck
How do you change a heater core on a 1998 Ford F150?
There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system.
How do you replace a heater core on a 1984 Ford F150 with ac?
Look up under the passenger's side dash close to the kick panel, and you will see a heater case. there on the front is a removable cover, held on with several 7mm screws. Remove that cover, disconnect the heater hoses under the hood, and replace the core. Reassembly is in reverse order of removal.
Where is the blend door actuator on your 1997 F150?
How do I locate the heater blend door actuator in a Ford f150 pickup
How do you replace heater core on a 1998 f150 v8?
There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system. There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system.
Do 1986 f150 have horns?
Yes, definitely.
