More than likely 5 quarts with filter change. Park vehicle on level surface. Change the oil/filter. Add 5 quarts and start the engine. Run for 1 minute and shut down for 30 minutes. Check the level and add as necessary to reach the full mark. You now know the capacity.
firing order for 1979 Pontiac 301 engine
The coolant capacity of a 1972 Oldsmobile Cutlass is typically around 12 to 14 quarts, depending on the specific engine and configuration. This includes the radiator and the engine block. Always check the owner’s manual or a service guide for the most accurate specifications for your particular model.
The Pontiac LeMans would be my choice. It is slightly larger and more luxurious. The Pontiac engine was also a better engine than the Chevy.
The power of the engine and the maximum speed of the 1972 Pontiac Ventura Automatic are 60 hp and 177 km/h or 110 mph.
The cylinder compression for a 1972 Pontiac 455 engine typically ranges from 8.0:1 to 8.5:1, depending on the specific model and configuration. This compression ratio is designed to accommodate the fuel quality available during that era while providing a good balance of power and efficiency. It's important to check the specific engine's specifications, as variations may occur based on factory options and modifications.
A 1972 Plymouth Duster with a 318 engine typically has a fuel tank capacity of around 14 gallons (53 liters). This capacity may vary slightly depending on the specific model and any modifications made over the years. Always consult the owner's manual or vehicle specifications for the most accurate information.
The coolant capacity for a 1972 Chevrolet Chevelle with an 8-cylinder engine is approximately 14 to 16 quarts, depending on the specific engine and radiator configuration. It's always a good idea to check the owner's manual or service manual for exact specifications, as variations may exist based on engine type and options.
On a 1972 Pontiac Grand Prix, the EGR (Exhaust Gas Recirculation) valve is typically located on the intake manifold, near the carburetor. It's a small, cylindrical component connected to the exhaust system and intake manifold by hoses. Depending on the engine configuration, it may be mounted on the driver’s side of the engine. Always consult a service manual for specific details related to your vehicle's engine.
This would be a model year 1972 through 1974 Type 1 Beetle engine.
From 1972 to 1979 the fuel tank capacity was 55l (14.6 US gallon)
Manufactured from late 1970 to late 1972 (model year 1971 to 1973) this would be a 1600 cc engine.
This would be model years 1972 through 1974 Type 1 Beetles with a 1600 cc engine size.