5.2 liters (318 cid)
In the power steering pump located on the front right side of the engine. It will have a pulley on it
Yes
Just reverse order of removal.
On a 1988 Chrysler 5th Avenue, the horn relay is typically located in the engine compartment, specifically in the power distribution center or near the fuse box. It may also be found mounted on the driver's side fender or in a similar location. To access it, you may need to remove the cover of the fuse box or the power distribution center. Always consult the vehicle's service manual for precise location details and diagrams.
Down towards the ground directly under the alternator. Should have 3 hoses goin to it.
Anything is possible. It would not be a direct swap.
To replace the engine mounts on a Chrysler 5th Avenue, first, securely lift the front of the vehicle and support it with jack stands. Remove any components obstructing access to the engine mounts, such as the air cleaner or battery. Use a jack to support the engine, then unbolt the old mounts from the engine and the frame. Finally, install the new mounts, ensuring they align properly, and reassemble any removed components.
Vacuum leaks in the A.C. system. DO YOU hear a faint humming or whistling sound?
Taking a guess, Your 1988 5th Ave has a 318ci motor with Lean-Burn Engine control. Chrysler put the control module in the rectangle box attached to the side of the air cleaner. All of the engine control module is inside that box to include the transistorized ignition system. Your distributor will have two pickup coils in it and not have a vacumn advance located on the side of it which will be another way of telling if you have the Lean-Burn system.
Its in the manual. It says the fromt park and turn is 194NA and 2057NA. The rear is given as 1157.
Impossible to answer this question as you fail to list the year. But I can tell you it is located somewhere between the fuel tank and the engine no matter what year it is.
3600 lbs