0
There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
What else can I help you with?
What is the gear ratio for a 1985 Chevrolet k10 pickup?
What is the gear ratio for a 1985 CHEVROLET K10 pickup
What is the gear ratio on a 1996 2wd suburban 1500?
What is the gear ratio on a 1996 2wd suburban 1500?
Gear ratio in a 2002 silverado 2500?
The Gear Ratio of the Chevrolet Silverado 2002 is estimated to be about 4. 10. The newer versions have a 3. 70 ratio.
What is Car starter ring gear ratio to starter?
siéra 1500
What is the gear ratio on 1992 Chevy silverdo 1500 series?
3.8
What is the gear ratio on 1998 Chevy silverado 1500 series?
3.8
What is the rear end gear ratio for a 1999 Chevrolet silverado 1500 z71?
You can call the dealer and give them the VIN# and ask them if they will tell you the gear ratio in your truck. PARTS DEPARTMENT. There's no way we can tell you what it is. If the GM dealer won't help you, then asked your question again and we will tell you what to do. so you will no yourself.
What is the gear ratio on a 2008 1500 5.3 4x4 silverado?
The gear ratio for a 2008 Chevrolet Silverado 1500 with a 5.3L engine and 4x4 drivetrain typically ranges from 3.08 to 3.73, depending on the specific configuration and options chosen. Most commonly, models equipped with the optional towing package have a 3.42 or 3.73 ratio. To confirm the exact gear ratio for a specific vehicle, you can check the RPO (Regular Production Option) codes found on the driver's side door jamb or consult the owner's manual.
What rear end gear ratio is interchangeable with a 2002 dodge ram 1500 FWD with a gear ratio of 355?
If the front is 3.55, then the rear needs to be 3.55
Is a 95 Chevrolet silverado front differential interchange with a 1996 Chevrolet silverado?
YES, as long as there the same GEAR RATIO.
What will happen if you take the rear end to a Chevrolet 1500 z71 and put the rear end to a Chevrolet 2500 in the place?
Nothing really. But remember that the front and rear ring and pinion MUST be the same gear ratio. You didn't say if the Z71 was a 4-wheel drive. If it is not then you will either kill the engine power are may even increase the power.That depends on the gear ratio in the 3/4 TON rear end and the 1/2 ton rear end. / DIFFERENCE Low gear verses high gear. Low gear= Power. High Gear = No power.
What gear ratio is in a stock 1996 silverado 1500?
i have a 92 silverado 1500. put 410 gear in and took out stock 308 gear. yours is probaly the same if you have 350 engine and 700 trans.
