There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
6000
The stock 1997 Ford Ranger typically comes with a gear ratio of 3.73:1 for the rear differential. This means that the driveshaft will rotate 3.73 times for every rotation of the rear wheels. The gear ratio is important for determining the vehicle's torque and speed characteristics. Different gear ratios can be installed to optimize performance for specific driving conditions.
3.08
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
In some 1982 Ford f100 trucks I know they have a 4.10 Gear ratio like my truck but with that gear ratio if you go over 55 mph you can say goodbye to your gas mileage so get a smaller gear ratio.
Steering gear remove and replacement 1997 Ford Thunder Bird LX
Ford Explorer Column Shifter Lever Bracket Repair
There is no way to change gear ratios.
not connected to transmission or the plasitc gear there stripped. sometimes the unit goes bad on the control arm
A good majority of the 1984 Ford F150 gear ratio had 3.00 gears for the stock. In addition, the spline should be a 31.
my 2001 ford windstar wont shift out of first gear.
Actually the Ford Expeditions where made from 1997 to Present. The 1997 to 2000 are the same. As long as the gear ratio is the same. It should fit.