0
What else can I help you with?
What is the location of the factory trailer wiring connector to connect an electric brake controller on a 2001 Dodge quad cab with the factory towing package?
Not all 1500's where built with it. If it is there it will be above the parking brake.
How does a Wii Nunchuk controller connect to the Wii?
To connect the Wii Nunchuk controller to the Wii, first put the cord through the connector hook on the Wii Remote wrist strap and then the locate external extension connector on the base of the Wii Remote to insert the Nunchuk plug.
What is the location of the factory trailer wiring connector for the electric brake control on a 2007 Dodge Ram 1500 with tow package?
The connecting outlet is located under the left side of the dash above the emergency brake. You are looking for a plug in outlet that is color coded blue. The connecting pigtail that you can get from any Dodge dealer will also be blue on the end that you are going to plug in. Connect them together and then you are ready to connect the other end to your electric brake controller.
Is there anyway I can use a lodgenet GameCube controller at my house?
Yes, get an rj45 phone connector and an old Gamecube connector. Connect the blue wire of the Gamecube to the blue of the controller. This is the data wire. Now connect the red and black wires in reverse to the lodgenet controller. This is why they say its not compatible with any home game system because they reversed the polarity. The other wires don't need connection. Enjoy your new super long gamecube controller.
How do you connect a CD-ROM directly to an electric socket?
To do this, you need a power adapter (a computer power supply will work great for this). The Drive will have a molex connector on the back for +12 VDC, ground, ground, +5 VDC. Connect a molex connector to that drive with the proper voltages, and the drive should power on. However, it won't be much good without connecting it to a computer motherboard, or drive controller.
How do you connect the mic for guitar hero warriors of rock?
Plug the USB connector into the USB Port... then control the menu with the normal Controller
How do you connect a PS3 move controller?
To connect any controller to a PS3 first plug in a USB cable to the controller. Connect this cable to the PS3 you want to connect the controller to. Press the PS button and the controller will connect.
Where is the wiring to connect an electric brake controller in a 2004 Chevrolet Silverado with factory towing option?
etrailer.com/faq_cbc.aspx
How to install an electric brake controller on a 2010 Jeep liberty?
To install an electric brake controller on a 2010 Jeep Liberty, first, locate the vehicle's wiring harness under the dashboard near the brake pedal. Connect the brake controller's wiring harness to this harness, ensuring the appropriate color-coded wires match. Secure the controller to a convenient location, typically under the dashboard, using the provided mounting hardware. Finally, test the connection by activating the brakes and verifying the controller responds correctly.
Xg 470 electric scooter wiring diagram for electric start?
To create a wiring diagram for the electric start of an XG 470 electric scooter, you typically need to connect the battery, ignition switch, motor controller, and starter relay. The battery positive terminal should connect to the ignition switch, which then connects to the motor controller. The controller should have outputs for the electric motor and the starter relay, which engages the motor when the start button is pressed. For precise connections, refer to the scooter’s service manual or manufacturer specifications, as wiring can vary by model.
How do you convert a ps3 controller to be used on a PC?
There should be a USB connector on the PS3 controller, just buy a USB cable that matches and connect the other end to your PC. If that doesn't work, then buy a Bluetooth adapter and download the appropriate software.
How do you connect SAS drives to a SAS controller in a xw8600 when the sata cables don't fit into the SAS drive connector?
To connect SAS drives to a SAS controller in an HP xw8600, you need to use the appropriate SAS cables, as SATA cables are incompatible with SAS connectors. Ensure that you have SAS breakout cables that have the correct connectors for both the SAS controller and the SAS drives. Connect the SAS drives to the breakout cable, and then attach the other end of the cable to the SAS controller. Make sure the drives are properly seated and the controller is configured to recognize them in the system BIOS.
