water pump
Its on the front top of engine,follow the top outlet hose from the radiator to to the engine block,where that ends at block,there will be a thermostat neck housing,the thermostat is under that neck housing generally it has two bolts on it,its a pretty easy job on these vans...
Water outlet housing.Water outlet housing.
follow your top radiator hose to the engine block. the hose will be attached to the thermostat housing. the housing is attached to the block with two bolts. remove the radiator hose from the housing, remove the two bolts, and gently separate the housing from the block. you will see the thermostat. The above answer is for a V6 engine. If your engine is a V8, follow the lower radiator hose toward the engine. The thermostat, housing & o-ring are one piece.
On a 1996 Pontiac Firebird V6, the thermostat is located on the engine block, specifically at the engine's water outlet housing. To access it, you'll typically need to remove the upper radiator hose, which connects to the thermostat housing. Once the hose is detached, you can unbolt the housing to reach the thermostat itself. Always remember to let the engine cool down before working on it to avoid burns.
Follow the top radiator hose back to the engine block. The thermostat is usually behind the housing that connects the radiator hose to the engine block. To be more specific Its on a housing on the passenger side of the engine block.
It is under the outlet where the upper radiator hose joins the engine. To change it: Remove the two bolts, the housing comes off and the thermostat is under it. It is a tiny thermostat. To install the new one, you will need two gaskets. The rubber gasket that goes around the thermostat and the regular gasket in between the outlet and the engine block.
The thermostat is located on a 2003 Oldsmobile Alero in the thermostat housing. The thermostat housing is located on the rear side of the engine block.
For the 2.7l engine, the thermostat housing is all one piece. The housing is located under the alternator and attached to the engine block.
Follow the top radiator hose back to the engine block. There is usually a housing where the hose connects to the engine block. Thermostats are usually under that houshing, or in some cases, the housing IS the thermostat.
i have the same problem. I took thermostat housing off the block, but cant get out thermostat. Any idea ?
On a 2006 Buick Lucerne with a V8 engine, the thermostat is located in the engine's coolant outlet housing. It can be found at the front of the engine, where the upper radiator hose connects to the engine block. Accessing it typically requires removing the upper radiator hose and the housing itself to replace the thermostat. Make sure to allow the engine to cool before attempting any maintenance.
In the Subaru SVX, the thermostat is located in the engine compartment, specifically in the coolant outlet housing on the engine block. To access it, you typically need to remove the upper radiator hose and the housing cover. It’s advisable to consult the vehicle's service manual for specific instructions, as the process can vary depending on the engine configuration.