The 1.4Tdci DuraTorq engine's sump plug requires a 14mm socket or cranked ring-spanner. Luckily, a 14mm spark-plug socket can be found in most motorists' tool-box. 14mm is also equivalent to 7/16 " Whitworth.
OOps! I got the above wrong! I meant a Spark-plug socket for 14mm spark-plugs (there are little 10mm spark plugs for lawn mowers and such) and that is actually a modern 21mm or old 7/16" Whitworth. Of course, the questioner is most likely asking about one of the older diesel engines - which are quite different.
Sump drain plug is 13mm hexagon A 13mm 6 point socket will remove it.
Does my 1995 ford fiesta 1.8 diesel have a timing belt or chain
Yes TDCi is a diesel engine
The torque setting for a Ford Fiesta diesel cam cap is typically around 10 Nm (Newton meters). However, it's essential to refer to the specific service manual for your model year, as torque specifications can vary. Always use a calibrated torque wrench to ensure accurate tightening.
how easy is it to change a oil sump gasket on a ford fiesta 1.4 diesel 2008
9.3 l
1800 tdi 75kw
The most effective way to drain a fiesta is to remove the lower radiator hose at the radiator end
at the rear of the sump.
bottom of radiator has plug normally 19mm wrench do not tighten to much it will break just snug it back.
Mine is 12mm wrench, but some are different.
I have a starting promblem on my ford fiesta 1.4 diesel zetec on 55 plate is it likely to be the glow/core plugs, if so how do I change them, where are they situated?