0
What else can I help you with?
What is the correct oil pressure for a 1988 Harley Davidson softail?
10 Psi is all that's required..the Harley engine needs oil Volume..not pressure..the lifters rquire 8-10 psi of oil pressure...Use a Synthetic oil..not the mineral .
How much 134a refrigerant does a 1993 Town Car need?
The total amount required is measured in PSI, which is about 35 PSI. Therefore, the amount you need is calculated by using the following formula: Required PSI = 35 PSI - Actual PSI
What psi on a dodge avenger?
Engine compression psi? Radiator cap psi? Engine oil pressure psi? Tire pressure psi? Fuel pressure psi?
Was is the psi on a 305 cylinder 1997 Chevy pickup?
Tire psi? Engine compression psi? Radiator cap psi? Engine oil pressure psi?
WHAT IS THE OIL PRESSURE RANGEIN PSI FOR A 2006 TOWN AND COUNTRY 3.3L?
The oil pressure Rangein PSI for a 2006 town and country 3.3L is between 5 - 10 psi.
How many btu per gallon of heating oil at 130 psi?
#2 fuel oil = 140,000 btu/gallon. Psi does not matter.
Cummins 5.9 oil pressures?
about 40 psi at idle, and 55-65 psi when driving
What is the normal oil pressure at idle and at 3000 rpm?
Probably 5 psi to 60 psi.
What is the correct oil pressure for a 1987 corvette?
The 1987 Chevrolet Corvette oil pressure should be between 45 PSI and 40 PSI. The idling oil pressure will be slightly less.
What is the psi on a 1989 Chevy S-10 2.5?
Oil pressure psi? Cooling system pressure psi? Tire pressure psi? Fuel pressure psi? Engine compression psi? Need more info please.
What is the oil pressure of the Chrysler 300c at idle?
10 psi minimum, 30 psi would be better.10 psi minimum, 30 psi would be better.
Three 200 check valves in a series how much pressure is required to push the oil through?
To determine the pressure required to push oil through three 200 psi check valves in series, you need to consider the cumulative pressure drop across each valve. Each check valve will require at least 200 psi to open, so you would need a minimum of 600 psi to ensure that all three valves open and allow oil to flow. Additionally, you should account for any additional pressure losses due to friction or other factors in the system.
