answersLogoWhite

0

I rebuilt my 231 (3800 series II, 3.8) chevy.

I checked the bearing clearances several times, and primed the engine before starting it the first time.

the current pressure I am seeing is about 70-80 cold and 45-60 at operating temperature.

if you are seeing anything lower than 30, it is likely time for a rebuild. the oil pumps on these engines are crank driven and there is no such thing (for these) as a high pressure pump.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Where is the oil pressure switch located on a 1997 Chevy Tahoe?

The oil pressure switch on a 1997 Chevy Tahoe is located on the back of the engine. It is in the center-rear part of the engine.


Why does engine oil pressure becomes high?

The pressure will be high until the oil reaches full operating temperature.


Why does the oil pressure in a 90 Chevy Beretta drop to 0 when the engine warms up?

it may be the oil pressure sender located on the engine


What is the normal oil pressure of a 6.0 Chevy?

The normal oil pressure for a 6.0L Chevy engine typically ranges from 30 to 60 psi when the engine is at operating temperature. At idle, it may be lower, around 10 to 20 psi, but should increase with RPMs. It's important to monitor the oil pressure, as significantly lower or higher readings can indicate potential engine issues. Always refer to the vehicle's service manual for specific guidelines.


Where is the oil pressure switch is located at in a Chevy 4.8 1999 Chevy pickup?

The Oil Pressure Switch is located on the driver's side top rear of the engine on your Chevy Pickup.


What is the oil pressure supposed to be on a 1995 Chevy Astro 4-3l vortec engine 4wd?

Oil Pressure is not a


Where is the oil pressure switch located on a 1998 Chevy Blazer?

The oil pressure switch on a 1998 Chevy Blazer is on the side of the engine block. It is located above the oil filter.


What causes oil pressure drop when engine has heated up during drive?

The oil gets thinner. It is normal for the oil pressure to drop after the engine has reached full operating temperature. If you have from 30-40 psi pressure when the engine is hot then that is normal.


Where is oil pressure switch 1989 Chevy Camaro rs?

The oil pressure switch on a 1989 Chevy Camaro RS is located on the bottom of the engine hear the oil filter. It constantly monitors oil pressure and updates the computer on its status.


How much oil pressure on a 88 Chevy truck 454?

For a 1988 Chevy truck with a 454 engine, normal oil pressure typically ranges from 40 to 60 psi at operating temperature. At idle, you may see lower readings, often around 10 to 20 psi, but it should rise with increased engine RPMs. It's important to monitor oil pressure regularly, as low pressure can indicate potential engine issues. Always consult the vehicle's service manual for specific recommendations and specifications.


Why is the oil pressure in your 1989 Chevy S-10 dropping?

It is normal for the oil pressure to drop when the engine is warmed up and at an idle.


What are the symptoms of low oil pressure on a 1982 Chevy 350?

Engine noise.