at the end of those black wires.....
The firing order should be 3241 on the dist. #1 is the cyl closesest to the passenger side and 4 is the drivers side.
You need to know the firing order to know where your wires go.
with much difficulty, i did it today and have bruises and scratching that will last a week!
the coil packs are numbered per cylinder
To change the spark plugs in a 2001 Ford Windstar, first, ensure the engine is cool and disconnect the battery. Remove the engine cover, if applicable, and locate the spark plug wires or coil packs. Carefully disconnect the wires or coils, then use a spark plug socket and ratchet to unscrew the old spark plugs. Install the new spark plugs, ensuring they are properly gapped, and reconnect the wires or coils before replacing the engine cover and reconnecting the battery.
On a 2001 Ford Ranger , 2.5 liter four cylinder engine : The spark plug firing order is ( 1 - 3 - 4 - 2 ) The spark plug wires connect to the two coil packs : ( 3 - 1 ) Spark plug wires on exhaust side ( passenger side of engine ) ( 2 - 4 ) ---------------------------------------------------------------------------------------------------- ( 4 - 2 ) Spark plug wires cross over top of engine to intake side ( driver side ) ( 1 - 3 )
P0300 means random misfire detected which probably has to do with the spark plugs or the plug wires
Clockwise, 1-3-2-4 There is a "1" on the distributor, standing in front of the car, #1 cylinder is on the left on the engine.
No , the 3.8 liter V6 engine in a 2001 Ford Windstar has the Electronic Distributorless Ignition System ( EDIS ) It has ( 1 ) coil pack that has ( 6 towers with 6 spark plug wires )
how to change spark plugs on a 2001 expedition
check haynes manual "firing sequence" or "firing order"