0
What else can I help you with?
What does the power a-t and.or comfort button does in a 1994 Infinity G20?
A/T - stands for Automatic Transmission. This is your trans. mode switch. Comfort Mode- It shifts quickly and smoothly. Power Mode- It revs up higher before shifting. Auto Mode-It picks power or comfort mode for you, power when you accelerate hard and comfort when you are going normally.
Monitor power button switch working but power is not out put in the monitor?
if it says power button locked hold "<" button and power button till the message goes.(at least a min)
Which switch supply power to a computer?
normally the power button :)
What does it mean Transmission Power or Comfort on a 1990 Jeep Cherokee Laredo There is a button that says Transmission then under it is says Power or Comfort What is this for?
The Power/Comfort button on late model Jeep Cherokee Laredos changes the transmission shift points depending on the selection. Pulling a boat? Use Power. The Comfort setting smooths out the shift points for a more comfortable ride.
How can I turn on the apartment heater?
To turn on the apartment heater, locate the thermostat and set it to the desired temperature. Then, switch the heater on using the power button or switch. Wait a few minutes for the heater to start working and adjust the settings as needed for comfort.
What is a detent switch?
It's a latching push button switch. To operate this type of switch, you press the button, which then latches into place. To switch off, you press the button again, which returns to its home position. Just like the power switch on your TV or HI FI.
How do you turn a television on?
You flip the on-off switch. It may be a button, or a knob.
How do you operate a push button switch to turn a device on or off?
To operate a push button switch, simply press the button to turn the device on or off. Pressing the button once will toggle the device's power status.
Should the kill switch button be up or down?
The normal position of the inertia switch button is down , if it has popped up then the switch is tripped and no power is going to the electric fuel pump
How to remove the driver's power seat switch from an infiniti g35?
To remove the driver's power seat switch from an Infiniti G35, first, disconnect the car battery to ensure safety. Next, use a flathead screwdriver to gently pry off the plastic cover surrounding the switch. Once exposed, remove the screws or clips securing the switch, then carefully disconnect the wiring harness attached to the back of the switch. Finally, pull the switch out and replace it as needed.
What is the power button for on the window switch of a 1992 mercury capri?
If you mean the extra switch on the drivers side power window control it cuts power to the passenger side window switch. Handy if you have kids.
Why would the system power on when the power switch in the back is flipped but does not boot until the front power button is pushed?
The switch on the back is the switch for the power supply only. The computer boots from the main power switch on the front. This particular method of switching was introduced with the ATX power supplies.
