0
hood open, view from the front of the motor on your left, passenger of motor to the right of the front valve cover find a brass bleeder screw. To your right, drivers side of motor find where the top rad hose connectes to the termostate housing find an other bleeder screw, remove both screws [DON'T LOSE THESE SCREWS], and top up rad and overflow bottal until coolant runs freely and no bubbles from the bleeder holes , reinstall bleeder screws and tighten to a little more than finger tight. Start motor, normal warm up, check for leaks at bleeder screws!!, and your complete system.
What else can I help you with?
Where are the oxygen sensors located in the 2000 Pontiac Montana?
they are located in the exhaust system Where ? how many 02 sensors on a 2003 Pontiac Montana
How do you drain the cooling system in a Pontiac Montana?
To drain the cooling system in a Pontiac Montana, first ensure the engine is cool and then locate the radiator drain petcock at the bottom of the radiator. Place a container underneath to catch the coolant, open the petcock, and allow the coolant to flow out completely. Additionally, you can remove the lower radiator hose for a more thorough drain. After draining, close the petcock and reattach any hoses as needed before refilling with fresh coolant.
04 Pontiac Montana where is factory amp located?
The Pontiac Montana does not come with a factory installed amp in the sound system. The wiring goes directly from the radio to the speakers.
What is the cooling system capacity for a 2002 Pontiac Bonneville SE?
Per the 2002 Bonneville Manual the cooling system holds 10 quarts.
How do you disengage the anti theft on a 2002 Pontiac grand am on your own?
How to disengage Pontiac Montana 2002 anti-theft system
How do you bleed cooling system on pontiac 2.4?
To bleed the cooling system on a Pontiac 2.4 engine, there is a small hose near the bottom of the radiator that needs to be removed. Then remove the radiator cap and the cap on the radiator overflow tank.
Where can you find a diagram of the cooling system for a 1996 Pontiac Sunfire with a 2.4 Liter Twin Cam motor?
The cooling system diagram for a 1996 Pontiac Sunfire can be found in its manuals. It can also be obtained as a print out at an auto part store.
Where can you find a diagram of the cooling system to a 98 Pontiac grand am?
A person can find a diagram of a 1998 Pontiac Grand AM cooling system in the cars maintenance manual. They can also ask a person at an auto part store for a print of the diagram.
Where is the condenser on the Pontiac Montana Mini Van 2004?
In front of the radiator. You will have to completely drain the cooling syystem, when it is cold, remove the fans and radiator, then you can access the condensor. You must have the A/C system evacuated before exposing the condensor to the atmosphere.
1999 Pontiac Montana won't start with new battery?
you will need to call a pontiac dealer and get an activation code, because of the anti-theift system.
Why is my car overheating after cooling system flush?
Probably still has air trapped in the system from an improper refill procedure.
What does the TCS button do on a 98 Pontiac Montana?
I have a 2000 pontiac montana. the tcs is know as traction control system. if your car is slipping a lot through water or snow, press that button and it will reduce slipping and wheel spin.
