8 to 10 degrees
The typical timing for a 1985 Chevy 454 is 8 degrees before top dead center. The vacuum line removed from the distributor and plugged. The engine warm and idling at 700 rpm.
what is the timing specifications for 1985 Chevy with a 5.7 liter 350?
You could put a vacuum gage on the engine and time it for peak vacuum. A timing light is still better.
You dont.
Try cleaning them.
how do you set timing on a 1985 350 gmc truck
The timing for a 1985 Chevy 2.8 V6 is 100 BTDC.
The timing should be set to 10 degrees BTDC.
10 degrees btdc
On the 1985 Porsche 944 8-valve, the timing marks are located on the crankshaft and the camshaft. The crankshaft timing mark can be found on the front pulley, while the camshaft timing mark is positioned on the camshaft gear. When aligning the marks for timing, ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. Proper alignment ensures the engine runs smoothly and efficiently.
For a 1985 Honda TRX 250 four-wheeler, the timing marks are typically located on the flywheel and the engine case. To properly set the timing, align the timing mark on the flywheel with the mark on the engine case when the piston is at top dead center (TDC) of the compression stroke. It's crucial to ensure that the timing chain or belt is correctly positioned to maintain proper engine performance. Always refer to the service manual for specific details and procedures.
8 degrees.