its 3.08 if its the base model and 3.42 if it has the y 87 package , check owners manual to be sure
most Z's had the 3.42 gear ratio.
3.42
The 1998 Chevrolet Camaro SS typically came with a standard rear axle ratio of 3.42:1. However, some models offered an optional 3.73:1 gear ratio for enhanced performance. The specific ratio may vary depending on the transmission and other factors, so it's essential to verify the exact configuration for a particular vehicle.
what trans u got
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
probably a 3.08 gear unless the high performance axle was ordered and then it would be a 3.23.
The axle ratio on a 1998 Mustang Cobra is 3.27:1
2.73
The 1982 Camaro Z28 typically came with a rear axle gear ratio of 3.42:1 as standard. However, some models could be equipped with an optional 3.73:1 gear ratio for enhanced performance. These ratios contributed to the car's acceleration and overall driving dynamics, aligning with the performance-oriented nature of the Z28 trim.
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
Gear ratio error in first gear.
The fourth generation General Motors F-Body (Camaro/Firebird) was offered in multiple rear end gear ratios. These included 3.02, 3.42, and 3.73.