1 1/4 inch
1 1/4 with 10" extention http://www.cobaltss.net/forums/showthread.php?t=22848
32 mm socket!
use a 1 and 1/4 inch socket to remove oil filter cap.
The socket size for the axle shaft not, on a 2006 Chevrolet cobalt, is three-quarter inch. The socket should be a five-point socket.
what size is the axle nut on a 03 chevy cobalt
The oil drain plug for a 2006 Chevy Cobalt typically requires a 15mm socket for removal. It's important to ensure you have the correct size to avoid stripping the plug. Always use a torque wrench to tighten the plug to the manufacturer's specifications after changing the oil.
My 2005 Chevy Cobalt has a 13.1 gallon tank.
Use water pump pliers, they fit almost all oil filters.
The drain plug on a 2007 Chevy Cobalt typically requires a 15mm socket. However, it's always a good idea to double-check with your specific vehicle's manual or to verify on the vehicle itself, as variations can occur depending on the engine type or any modifications made.
15mm Socket size.
group size 47
12x1.5mm