The spark plug gap on a 96 Olds Aurora should be set at .050, and they should be torqued at 11 foot-pounds.
It should be .050
.050"
To change the spark plugs on a 1996 Oldsmobile Aurora, first, disconnect the battery to ensure safety. Remove the engine cover if necessary, then locate the spark plugs, which are typically beneath the ignition coils. Unscrew the ignition coils, carefully pull them out, and then use a spark plug socket to remove the old spark plugs. Install the new spark plugs, ensuring they are properly gapped, reattach the ignition coils, and reconnect the battery.
Check on driver or passenger side of the radiator, on the side next to the motor. Should be a small metal plug.
WHAT YEAR??
The plug diagram for a 1998 Oldsmobile Aurora typically refers to the ignition coil and spark plug layout. The Aurora features a 4.0L V8 engine with a specific firing order and cylinder arrangement. The spark plugs are arranged in a V configuration, with cylinders numbered 1-4 on one bank and 5-8 on the other. For precise wiring and connections, it's recommended to consult the vehicle's service manual or a repair guide specific to the 1998 Aurora.
with a spark plug sockett
The recommended spark plug gap for a 1979 Olds 4.9L is .060"
Standing in front of the engine, Cylinder 1 is in front of you, to make it easier for you, follow the shortest spark plug wire. That one will lead you to the very first spark plug which is where cylinder 1 is.
6 spark plugs 1 spark plug to every cylinder.
The 1996 GMC Sierra six-cylinder spark plug gap, is .009. Most spark plugs are pre-gapped by the spark plug manufacturer.
.096 is the spark plug gap