The spark plug gap for an Oldsmobile 88 typically ranges from 0.035 to 0.045 inches, depending on the specific engine model and year. It's essential to check the owner's manual or a repair guide for the exact specification for your vehicle. Proper gapping ensures optimal engine performance and fuel efficiency. Always use a gap tool to accurately set the gap before installation.
Screwed into the heads.
.060 thounsands
It is located where all the spark plug wires attached to the spark plugs go to it.
Want an answer, then provide a model year.
Check for spark & fuel when it's dead and go from there.
HEI should be at .080. If not HEI then .045
Here is 1993 Oldsmobile Delta 88 3.8 liter V-6 since you didn't provide the year of yours. [http://autorepair.about.com/library/firing_orders/bl-fo-8157.htm 93 Delta 88]
crank or cam sensor...did you already figure it out?
To install spark plugs on a 1989 Oldsmobile 88, first, ensure the engine is cool and disconnect the battery. Remove the old spark plugs using a spark plug socket and ratchet, taking care not to drop debris into the cylinders. Gap the new spark plugs according to the manufacturer's specifications, then carefully thread them into the cylinder head and tighten them to the recommended torque. Finally, reconnect the spark plug wires, ensuring they are properly seated.
To access the spark plugs in a 1998 Oldsmobile Delta 88, first, open the hood and locate the engine. Remove any necessary components that may obstruct access to the spark plugs, such as the engine cover or ignition coils. The spark plugs are typically located on the engine's cylinder head, so you may need a ratchet and socket to remove them. Ensure the engine is cool before starting the replacement process.
Where is the starter relay located on the 1996 Oldsmobile 88?
On my 1993 Oldsmobile 88, it is number "8"