0
The stock gear ratio for a 1989 Chevy 1-ton truck can vary depending on the specific model and options, but it commonly features a 3.73:1 or 4.10:1 gear ratio, particularly for those equipped with the heavy-duty towing package. For precise information, it's best to check the vehicle's specifications or the RPO (Regular Production Option) codes.
What else can I help you with?
Whats is the gear ratio for a 2000 Chevy silverado extended cab 4x4 half ton?
The standard gear ratio on a 2000 Chevy Silverado extended cab 4x4 half ton truck is 3.73. This means that for 3.73 rotations of the shaft , the wheels turn one time.
Is a 1982 GMC half ton 2wd rear diff housing the same as a 1982 Chevy half ton 4wd rear diff housing?
The HOUSINGS are the same, But the gear ratio is probley different.
What is the rear end ratio in a 78 Chevy 1 ton with the granny gear 4 speed?
The rear end ratio in a 1978 Chevy 1-ton truck with a granny gear 4-speed transmission typically varies based on the specific configuration and options chosen by the original owner. Common ratios for this model include 3.73, 4.10, and 4.56. To determine the exact rear end ratio for a specific truck, you may need to check the build sheet, the VIN, or inspect the rear differential for markings.
What gear ratio is a 1989 Chevrolet half ton rear end?
I have 89 Chevy extended cab pickup 350ci 700r trans i would like to know the rearend gear ratio and if 89 3/4 ton rear would help tow 6500# camper have replaced leafs with 3/4 springs seems original rear geared to high trans gets hot
Can you swap the rear end of a 1991 Chevy half ton with one from a 1986 Chevy half ton?
yes you can swap rear ends from late model to early model and visa versa... as long as the gear ratios are the same. the rear ends in my 1996 full size and my 1986 full size are exactly the same except for a 3.08 ratio and a 3.42 gear ratio... No. The spring perches are in different locations between the OOBS ('73-'87) and the OBS ('88-'98) trucks.
Gear ratio for 1999 Chevy half ton pickup?
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
Gear ratios for a1960 Chevy 1 ton truck?
A good way to get the final drive ratio with the tires you have on the vehicle is to raise the rear tires off the ground. Put the vehicle in neutral, mark the drive shaft, then while rotating the tire one full revolution count how many revolutions the drive shaft makes. that would be the final drive ratio. drive shaft revolutions over 1 so three and one third revs of the drive shaft to one rev of the tire would be 3.33/1 or 3.33 gear ratio. note if tires are larger than stock or smaller than stock it will change the actual drive ratio. Or you could remove the differential cover and count the teeth on the ring gear and the teeth on the pinion gear then divide the ring gear number's (larger number) by the pinion teeth number (less teeth) to find out the exact gear ratio. I would think it will be somewhere between 3.08 to 4.56
I have a 1978 Chevy truck half ton four wheel drive with 308 gear ratio front and back the rear end went out so i put a rear end out off a 1982 Chevy truck half ton four wheel can i put 308 gears in?
Yes you can, But the 308 ring and pinion will have to be for the 1982 carrier that's in it now.
Why won't my 96 Chevy half ton 4x4 shift down into passing gear?
Adjust the kickdown
What is the gear ratio in your 1990 Chevy 34 ton 2wd with 350?
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
Does a 83 Chevy c10 truck come stock with a 350 engine?
The 83 Chevy C10 comes with a 305 but not a 350. The 350 is an option on the 3/4 ton but not the 1/2 ton.
What is the towing capacity of a l980 half ton Chevy pickup with a 305 engine?
largely depends on axle ratio
