0
What is the thread and size of the bolt that holds up the spare tire on a '94 ford ranger?
This site gives a part number: http://www.autozone.com/az/cds/en_us/0900823d/80/0b/e6/c3/0900823d800be6c3/repairInfoPages.htm N802273 S55 (sold as N802273 S2 by grahamparts.com for ~$5.00) corresponds to metric size designation M12-1.75 x 35. I bought one at Lowes for about $1.50 in their hardware section (Lowes cash register code 83849). Fit my '97 Ranger fine.
What else can I help you with?
What thread is the bolt that holds the harmonic balancer to the crankshaft on a 350 chev?
It is a standered fine thread bolt, Grade 8
How do you remove the spare tire from under a 1995 ford ranger?
undo the bolt in the middle of the tire and pull the barcket down
How do you remove the spare tire from a 1997 ford ranger?
use a socket to loosen the bolt holding it up and pull the bracket down
How do you get the spare tire down on a 1999 Toyota Sienna?
You must access the bolt that holds the spare tire in place from the inside of the car. There is a flap in the carpet in the rear storage space behind the last row of seats. Lift the flap, loosen the bolt, and the spare tire will be lowered so that you can remove it.
Is the thread reversed on a Chevy Malibu 2001 harmonic balancer?
Yes, the bolt that holds the harmonic balancer in place on a 2001 Chevy Malibu is reverse thread. I learned that the hard way and stripped the head of my bolt down to nothing. And the bolt is almost impossible to find, because they no longer make them.
What is the value of ranger model 35 single shot bolt action 22 rifle?
The value is about $45 as it was MASS produced and there are plenty of spare parts available.
Removal of spare tire from Ford Ranger XLT?
You will need a ratchet and a socket to remove it. You get under the rear of the truck and you will see the bolt and bracket holding the tire in place. Remove the bolt and the bracket hinges downward.
What fullform of UNC nut and bolt?
UNC stands for "UNIFIED BOLT THREAD COARSE" UNF stands for " UNIFIED BOLT THREAD FINE"
How do you get the spare wheel off a citroen c2?
To remove the spare wheel from a Citroën C2, first, locate the spare wheel compartment, typically found in the boot (trunk) under the floor mat. Use the provided tool to unscrew the retaining bolt or clamp that holds the spare wheel in place. Once the bolt is removed, lift the spare wheel out of the compartment. Ensure you securely store the tools back in their designated place after use.
Wheel bolt pattern 2002 Ford Ranger?
what is the lug/bolt pattern for a 2000 ford ranger?
What are the bolt patterns for a 2000 Ford Ranger?
bolt pattern for 2000 ford ranger & ft pounds
Is the Tensioner Arm bolt on a 99 mustang a reverse thread bolt?
No it is not. The bolt on the pulley is but the tensioner mounting bolt is a T55 torx bit head with the standard thread (right/tight left/loose).
