The timing mark on a 3400 Chevy Venture engine is typically located on the harmonic balancer and aligns with a pointer on the engine block. For proper timing, you need to set the mark to the specified degree before or after top dead center (TDC), depending on the engine's requirements. Refer to the vehicle’s service manual for the exact timing specifications and procedures. Always ensure the engine is at the correct operating temperature when making adjustments.
The timing mark on a Chevy Inline 6 engine is located on the flywheel. It is a steel ball. The timing needs to?æbe located at 4 degrees BTDC.
30 degrees dwell, timing is the second mark above the O mark on the timing tab.
there will be a timing mark on the harmonic balancer. and a timing tab on the timing chain cover. point your timing light at the timing tab and you should see the timing mark on balancer. if not timing is way out.markstang.
Crankshaft
Top Dead Center
Hargun, if your reading this, you suck.
The timing mark is one the Harmonic balancer and the pointer is attached to the timing cover. Roll the motor over to the timing mark, the be sure and mark the number one plug {marked on the intake manifold} the position of the rotor pointer on the distributer.
One is advance mark, one is retard mark, one is dead on mark.
On a 2002 Chevy Express 1500, the timing mark is typically located on the harmonic balancer, which is situated at the front of the engine. You should see a mark or notch that aligns with a timing tab on the engine block. For precise timing adjustments, it's essential to refer to the vehicle’s service manual for specific details and alignment procedures.
If you look at the harmonic balance you will see on the front of it a medium size circle. That will be your timing mark.
That means the timing chain and gears are worn out / to loose.
bryden hugginggs is coool its the second mark that approaches the timing plate. fist one disreguard