0
What else can I help you with?
What are the torque specifications for a 1996 Dodge Intrepid main barring cap bolts?
The 1996 Dodge Intrepid main bearing torque specification is 180 pounds. The main bearings should be torqued in 60 pound intervals.
What is the torque for an 1986 Dodge 318 rod bearing bolts?
the correct torque for these bolts is as follows: 96lbs
How do you change water pump on 3.5 liter intrepid?
How do I change the oil pan gasket on a 1999 Dodge Intrepid with 3.5 engine, what is the proper torque for the bolts.
How many bolts in a Dodge Intrepid starter?
Three bolts hold it to the engine.
2004 dodge 2500 front bearing hub bolts torque spec?
Hub/Bearing Bolts HD = 130 ft. lbs. or 176 N.m LD & SRT 10 = 120 ft. lbs. or 163 N.m
How tight does the bolts on a 94 Dodge Intrepid valve cover have to be?
The bolts on a 94 Dodge Intrepid valve cover need to be very tight. You should tighten to 12 N*m or 105 inch pounds.
What is the torque for the 1974 Dodge Dart 318 rear main seal cap bolts?
All main bearing caps should be tightened to 85 foot-pounds.
What are the torque specs for rod cap bolts on a 3.7 jeep engine?
Torque specs for main bearing
What causes valve covers on dodge intrepid to crack?
The bolts that hold it on are over torqued.
Is the bolt pattern on a 1997 Dodge Intrepid for the water pump 3 or 6 bolts?
There are three bolts. 10mm socket
What is the torque settings on the main bearing bolts on a Kia K2700?
Torque settings for main bearings and big end bearings
Head bolts torque settings?
hi i am looking for the torque settings for a proton gen 2 cylinder head bolt and crank shaft bolts both big ends and main bearing bolts
