I found a website online that has all the torques listed for all vehicles. http://www.torkspec.com/torkspec.aspx
The torque specs for the cylinder head on a b2200 are 59-64 ft lbs (cold).
33 Ft. lbs
65 ft-lbs
do the bolts on a 1990 pickup truck go in vertical or horizontal
The V-8s are 65 foot pounds.
3.4 litre cylinder head torque is 37 ft lbs +90 degrees
Torque convertor could be defective siezed up.
step 1 33ft lbs step 2 turn 90 degrees (1/4 turn) step 3 turn 90 degrees ( 1/4 turn)
Pressure plate to flywheel bolts - 24 ft/lbs
We usually set them at 15 ft lbs
follow your top radiator hose,its in the thermostat cover,two bolts hold it on.
The 1990 Ford Festiva 1.3 liter engine cylinder head bolt torque specification is 125 pounds. The cylinder head bolts should be torqued in 25 pound intervals.