answersLogoWhite

0

what kind of car? each car has it own torque spec 2000 Chevy Cavalier

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What are the torque specs for a 94 sc2 valve cover gasket?

89inch pounds is the torque rating for the valve cover bolts


What is the torque and tightening sequence for the valve cover gasket for a 1992 for tempo 4 cylinder?

Torque for valve cover bolts is 7 to 10 ft. Lbs . Tighten the bolts in a criss-cross pattern .


What are the valve cover torque specs for a 2001 3.0 Mitsubishi Montero Sport?

The 2001 Mitsubishi Montero Sport 3.0 liter engine valve cover torque specification is 40 pounds. You do not want to over torque the valve cover bolts, as you may ruin the valve cover gasket.


How to Replace valve cover gasket on 1988 Toyota Camry?

To replace the valve cover gasket on a 1988 Toyota Camry, first, ensure the engine is cool and disconnect the battery. Remove any obstructions, such as the air intake and ignition components, to access the valve cover. Unscrew the valve cover bolts, gently lift the cover off, and clean the mating surfaces. Finally, place the new gasket, reassemble the cover, and tighten the bolts to the specified torque.


Valve head gasket is leaking oil?

Sometimes a leaking valve cover gasket can be fixed by simply retorquing the bolts to their proper torque. If that doesn't solve the problem, the gasket will have to be replaced as per your engine manufacturer's specifications.


How to Replace valve cover gasket 2002 dodge neon?

remove the valve cover pull off the valve cover gasket and put new one up making sure you dont over tighten the valve cover bolts make sure you have correct torque replace all the o rings inside valve cover while changing main gasket for best results


How do you remove the valve cover gasket from a 1992 Mercedes-Benz 190E?

remove the 10mm bolts from the edges and clean all surfaces VERY CLEAN and replace gasket and then torque the bolts back not sure of the lbs to torque to good luck it is not hard to do


How do you remove the valve cover gasket from a 1992 Mercedes Benz 190E?

remove the 10mm bolts from the edges and clean all surfaces VERY CLEAN and replace gasket and then torque the bolts back not sure of the lbs to torque to good luck it is not hard to do


How do you replace valve cover gasket for 1998 Toyota Sienna?

To replace the valve cover gasket on a 1998 Toyota Sienna, first, ensure the engine is cool and disconnect the battery. Remove any components obstructing access to the valve cover, such as the air intake or ignition coils. Unscrew the valve cover bolts, carefully lift off the cover, and remove the old gasket. Clean the mating surfaces, place the new gasket in position, reassemble the cover, and torque the bolts to the specified settings before reconnecting the battery.


How do you change valve cover gasket on a 2009 Chevy aveo?

To change the valve cover gasket on a 2009 Chevy Aveo, first ensure the engine is cool and disconnect the battery. Remove any components obstructing access to the valve cover, such as the air intake and ignition coils. Unscrew the valve cover bolts, gently lift the cover off, and clean the mating surfaces. Replace the old gasket with a new one, reassemble the cover, and torque the bolts to the specified settings.


What is the torque level for valve cover gasket on 1989 mercury topaz 2dot3l?

The torque specification for the valve cover bolts on a 1989 Mercury Topaz 2.3L is usually around 35 inch-pounds. It is recommended to tighten the bolts in a crisscross pattern to ensure even distribution of torque and to prevent leaks.


How do you replace a valve cover gasket 1997 vw cabrio?

To replace the valve cover gasket on a 1997 VW Cabrio, first, disconnect the negative battery terminal and remove any components obstructing access to the valve cover, such as the air intake or ignition coils. Remove the valve cover bolts and carefully lift off the cover, cleaning the surface and removing any old gasket material. Place the new gasket onto the valve cover, ensuring it sits properly, then reattach the cover and torque the bolts to the specified settings. Finally, reconnect any removed components and the battery terminal.